Thread Number: 83280  /  Tag: Modern Automatic Washers
Maytag MVW7230HW thoughts, opinions?
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate automaticwasher.org if you make a purchase using any link to eBay on this page]
Post# 1075927   6/5/2020 at 18:13 (1,414 days old) by panasonicvac (Northern Utah)        

panasonicvac's profile picture
Hi there again,

My brother and sister-in-law are planning on picking up a new washer tomorrow from their local home furnishing store. This is the one that they're looking into getting, seems and looks cool to me but I'm wondering if there are any better options out there for something similar to this.

www.maytag.com/washers-an...

Any thoughts or experience would be greatly appreciated!

Thanks!



  View Full Size



Post# 1076040 , Reply# 1   6/6/2020 at 13:17 (1,413 days old) by vacerator (Macomb, Michigan)        
One of their

latest, largest, or second largest capacity. Pulsator reversing wash action. Sorry, not into top loaders anymore since My Maytag by Whirlpool Bravos X died. Most any store will allow them to return the machine within 30 days if they are not satisfied with it. Thats why you see so many open box ones on the sales floors away from the appliance dept. in another aisle, or at the frint of the stores on clearance.

Post# 1076057 , Reply# 2   6/6/2020 at 14:38 (1,413 days old) by combo52 (50 Year Repair Tech Beltsville,Md)        
It is a good machine for its type

combo52's profile picture
But I would take about any Front Load washer built over one of these newer TL machines.

John L.


Post# 1076059 , Reply# 3   6/6/2020 at 14:45 (1,413 days old) by bradfordwhite (central U.S.)        

bradfordwhite's profile picture

A front loader will do a better job.

 

loving your vacuum videos.


Post# 1076087 , Reply# 4   6/6/2020 at 19:11 (1,413 days old) by eurekastar (Amarillo, Texas)        

eurekastar's profile picture

I would definitely try and steer them toward a front loader.  Whirlpool built top loaders (e. g. Maytag) have LONG cycles times and rinse poorly.


Post# 1076162 , Reply# 5   6/7/2020 at 07:25 (1,412 days old) by PinkPower4 (USA)        
Top Loaders

In my opinion, the best top loaders to look at are the Speed Queen TC5000 with silver control panel (not the TR series with the black control panel) and the Maytag mvwp575gw(independent appliance retailers w/ 5 year parts and labor warranty) or mvwp576kw (Lowes with 1 year parts and labor warranty). Both of these washers have short washing times and plenty of water. They are the closest you can get to the old-fashioned good ones most of us older folks remember. Roper, Amana, and Conservator also have a budget model with a dual-action agitator for around $500? Unlike older models, all new washers I am aware of have electronic control boards behind the knobs now. SQ has two and MT has one.

The SQ TC5 stands out for being more durable and better built yet still has good washing performance. Biggest quirk is two water level choices (instead of more water level choices like older models had): full tub or half tub.

The Maytag models I mentioned stand out for the dual action agitator. I have the mvwp575gw. Not only does the tub and agitator move in separate directions, but the top and the bottom of the agitator move independently too. This creates a better wash performance where the clothes are moved down, through, and around the water better. This is especially noticeable with bulkier items like a fluffy comforter. Its biggest quirk is also two water levels. However, with this washer "Normal" is the only cycle you can wash smaller loads with. Normal is not suitable for delicates, and some cold water is mixed in when set to hot (I just add hot water manually for my smaller loads of whites). I don't expect this Maytag to last as long as the TC5000, but mine costs $750 vs. $1000 AND also came with a 5 year parts and labor warranty included. TC5000 comes with 3 year parts and labor and an additional extended three year warranty is available. Balancing loads is not an issue with the MT if you wash like items with like items.

For front loads, *I* would look at LG3900 or the 3700 models. My previous washer was an LG front load. Lasted ten years before bearings went out with only two minor repairs. Rotor vibrated loose (less than $100 and easy to fix) and drain pump (our fault) but also inexpensive and user replaceable. I had no issues with mold--just left the washer door cracked (and this is in a house where I often keep the AC around 80). Dryer is 12 years old and still works.

In general, impeller washers work well for smaller items and clothing but not nearly as well for bulkier items like comforters--the turnover just is not there. Also, the tub capacity may appear larger but some of these washers fill with very little water. Also, it *seems* they do not wash larger loads as well--again turnover.

Lorain Furniture and Kirk Rivas has some great reviews on these and other washers. My statements above are in general. Their reviews will help you sort out the pros and cons better for the particular models interested in.


Post# 1076268 , Reply# 6   6/7/2020 at 21:43 (1,412 days old) by panasonicvac (Northern Utah)        

panasonicvac's profile picture
Thank you everyone for your feedback, I really appreciate it!

Yesterday they picked up the MVW7230HW which no surprise there. They actually got a good deal on it, it was new but it only had like a scratch on it which was why the price had dropped. So that including tax and the warranty they bought for it was like $730. We'll see what they think but seems like they're liking it so far.

I think the reason they went with a top loader is because that's the type of washer they have been using for a long time, I don't think I ever recall my sister-in-law using a front loader before but I could be wrong. I will say this, I am very impressed with our new LG front load washer. But I think for my very first washer and dryer to have in my own house, I'm leaning towards on getting a Speed Queen TC5 and a DC5. I've actually seen some videos from Lorain Furniture before and he's one of the reasons why I'm interested in getting the Speed Queen TC5.

Thanks again folks!


Post# 1076306 , Reply# 7   6/8/2020 at 08:04 (1,411 days old) by PinkPower4 (USA)        
SQ TC5000

Because of new energy regulations, it is my understanding the TC5000 won't be produced after the end of this year. If you want to get one, you may want to get one while you can toward the end of this year. SQ came out with a updated TR series models, so it looks like they are going in that direction. In my opinion, the agitator and tub that move in the same direction don't wash all types of loads I do as well as their TC model where the tub and agitator move in separate directions.

Post# 1076317 , Reply# 8   6/8/2020 at 09:55 (1,411 days old) by littlegreeny (Milwaukee, WI)        
Pink

littlegreeny's profile picture
Where did you hear the energy regulations are being updated? Your post prompted me to research whether energy regulations were being updated and the only thing I found was the DOE was seeking comments late last year whether they need to amend the current energy requirements.

CLICK HERE TO GO TO littlegreeny's LINK


Post# 1076319 , Reply# 9   6/8/2020 at 10:02 (1,411 days old) by DADoES (TX, U.S. of A.)        

dadoes's profile picture
 
Seems the industry is backsliding on water and/or energy regulations with these goofy new models that have a fill-level choices of only 1/2 or full-to-the-top.

Can't do this no mo'.


  Photos...       <              >      Photo 1 of 2         View Full Size
Post# 1076320 , Reply# 10   6/8/2020 at 10:05 (1,411 days old) by combo52 (50 Year Repair Tech Beltsville,Md)        
Speed Queen TC-5

combo52's profile picture
Is not going anywhere at the end of this year.

SQ is also continuing to build the traditional transmission equipped TL washers because the new style TR style TL washers will not cut it for commercial use.

I still predict that SQ will have to put a mode shifter in their TL machines eventually. I have no dough that they are testing such designs.

John L.


Post# 1076368 , Reply# 11   6/8/2020 at 15:22 (1,411 days old) by PinkPower4 (USA)        
SQ TC5

I hope the TC5 continues to be available to the general public. However, if they only make this transmission models for commercial use, they may not be available for consumer purchase. I was unable to purchase a LWN model locally as I was told the SQ stores near me were only authorized to sell residential models. Although u can possibly purchase online, there may be additional concerns trying to get warranty work done or return if the needed for whatever reason.

The info about the discontinuation was from a source I consider reliable, but it was an educated guess based on information available at the time. I have not heard much lately about this. Maybe some of that never passed or will take effect??? Not sure, but just a heads up that you may want to keep an ear open since this is the top load u want.

The energy regulation were passed with good intentions but poorly researched and result in the use if more water, additional chemicals, and increase the time it takes to wash a load. Cheaper build quality results in these things winding up in the landfills quicker too. Speed Queen is known for being more durable.


Post# 1076373 , Reply# 12   6/8/2020 at 15:45 (1,411 days old) by JustJunque (Western MA)        

justjunque's profile picture
If the TC5 was definitely going away, I'd be seriously tempted to get one and keep it "in the box" until our old reliable finally quits.
The lack of infinite water level choice doesn't thrill me though. For what they cost, you'd think they could include it. Unless big government said no.
Someone here recently acquired a vintage, lower end washer and discovered a functional water level selector, hidden behind the panel. Too bad SQ couldn't sneak something like that in.

Barry


Post# 1076426 , Reply# 13   6/8/2020 at 22:09 (1,411 days old) by panasonicvac (Northern Utah)        

panasonicvac's profile picture
I also hope that the TC5 isn't going to go away anytime soon, otherwise I may as well look into the Maytag MVWP575GW washer and the MEDP575GW dryer instead.

Post# 1076465 , Reply# 14   6/9/2020 at 10:21 (1,410 days old) by lakewebsterkid (Dayton, Ohio)        
Bravos XL

My grandparents were actually able to 'inherit' a new Maytag Bravos XL pair to replace their Kenmore 80 series pair. They are not sold. My grandmother is not able to reach the bottom of the machine, and can just barely set the cycles on the machine. She states that it does not clean as well, but notes that the clothes are spun out better. I have not personally used this generation of machine, but have heard enough and spent enough time watching videos to say avoid them. Buy a front loader if possible!


Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy