Thread Number: 83721
/ Tag: Member Selling Item(s)/Non Professionally
Correct Frigidaire Lid Bumpers ..... |
[Down to Last] |
|
Post# 1081429 , Reply# 1   7/17/2020 at 18:27 (1,349 days old) by TrainGuy (Key West, FL)   |   | |
Checkrate/Likes
 
     
|
Post# 1081489 , Reply# 2   7/18/2020 at 07:39 (1,349 days old) by sfh074 ( )   |   | |
Checkrate/Likes
 
     
I would like to know what else these would fit and look basically correct. Someone else had mentioned some of the older Kenmore and WP models have very similar bumpers. |
Post# 1083096 , Reply# 5   7/30/2020 at 12:05 (1,337 days old) by Hippiedoll ( arizona )   |   | |
Checkrate/Likes
 
     
|
Post# 1087539 , Reply# 6   9/1/2020 at 17:34 (1,303 days old) by Hippiedoll ( arizona )   |   | |
Checkrate/Likes
 
     
|
Post# 1087543 , Reply# 8   9/1/2020 at 18:05 (1,303 days old) by Hippiedoll ( arizona )   |   | |
Checkrate/Likes
 
1    
|
Post# 1087544 , Reply# 9   9/1/2020 at 18:11 (1,303 days old) by Hippiedoll ( arizona )   |   | |
Checkrate/Likes
 
     
thanks for the tip.
I moistened the skinny tip & ridge with dishwasher rinse-aid. And I pressed the bumpers against the lid holes. And with this skinny metal tool we have, with a bent tip, little by little I pushed the ridge all the way around, into the opening. Here's a picture of the tool I used. I used the 90° angle bent end.
View Full Size
|
Post# 1087545 , Reply# 10   9/1/2020 at 18:15 (1,303 days old) by Hippiedoll ( arizona )   |   | |
Checkrate/Likes
 
     
|
Post# 1088052 , Reply# 11   9/5/2020 at 17:31 (1,299 days old) by sfh074 ( )   |   | |
Checkrate/Likes
 
     
for the update on the bumpers. So glad you likedthem. How did Fran's next load turn out? Was the lid quieter with the new bumpers? Bud - Atlanta |
Post# 1088059 , Reply# 12   9/5/2020 at 18:12 (1,299 days old) by Hippiedoll ( arizona )   |   | |
Checkrate/Likes
 
     
|