Thread Number: 85951  /  Tag: Refrigerators
Is lower # colder or warmer?
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate automaticwasher.org if you make a purchase using any link to eBay on this page]
Post# 1105012   1/18/2021 at 21:29 (1,185 days old) by zacfonx (Knoxville)        

zacfonx's profile picture
I have a 1950’s Hotpoint refrigerator. Is the lower number colder or warmer?

Attached a photo. Model unknown. Photo 2 is dial.


  Photos...       <              >      Photo 1 of 2         View Full Size



Post# 1105016 , Reply# 1   1/18/2021 at 21:56 (1,185 days old) by warmsecondrinse (Fort Lee, NJ)        

On the few refrigerators with that type of dial I've used, a lower number is warmer because you are sliding/rotating the numbers toward the 'warmer' side of center. Conversely, by sliding/rotating the numbers toward the 'colder' side of center you're setting the thermostat lower, which is labelled with higher numbers.

Again, I've only encountered a few such temperature controls. They were mostly owned by older relatives. However, they all worked the way I've described.

That said, we've members here with much more experience with such equipment than I do. While you're waiting for others to chime in, I'd put a thermometer in the 'fridge to get a starting point: '2' = __?__F. Assuming that's a stable temp, rotate the dial to '4' and note if the compressor runs more often and/or the temp drops.

Hope this helps.


Post# 1105113 , Reply# 2   1/19/2021 at 13:07 (1,185 days old) by RP2813 (Sannazay)        

rp2813's profile picture

I agree that on this fridge, the higher the number, the colder the setting, and the logic presented by Jim bears this out.

 

The best method I've found for testing the cabinet temperature is to place a thermometer in a glass of water and leave it in the center of the fridge for a day or so, then check it.  You want an average temp of 37.  Adjust in small increments if it's either too warm or too cold (not a whole number higher or lower unless it's way off), and waiting a day before checking the temp again.  Keep in mind that the temperature will be lower in the area close to the freezer compartment (AKA the evaporator), so you'll need to find a happy medium and/or place contents accordingly.


Post# 1105133 , Reply# 3   1/19/2021 at 15:24 (1,184 days old) by DADoES (TX, U.S. of A.)        

dadoes's profile picture
 
Door shelves are typically the least-cool area ... milk is better on an interior shelf.


Post# 1105153 , Reply# 4   1/19/2021 at 20:54 (1,184 days old) by gredmondson (San Francisco, California 94117 USA)        

gredmondson's profile picture
Another way to look at this question is by looking at the words "COLDER" and "WARMER" above the dial. I can see a "3" to the right of the "2" on the dial. If you put your finger on the dial, and move your finger against the dial to "COLDER," the "3" will be at the bottom, and if you continue to turn the dial in the same direction, then the next higher number will appear. So, the higher the number, the colder the setting. I think!


Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy