|
Thread Number: 86364
/ Tag: Modern Automatic Washers
Fisher&Paykel Eco to Aquasmart conversion. Is it remotely possible |
[Down to Last] |  |
| Post# 1109450 2/24/2021 at 20:09 (1,146 days old) by MaytagNeptune (FireAlarmTechGuy4444 on YouTube. Interlochen MI) | ||
I have the board and console and water inlet valve and washplate/impeller from one that someone pitched. it was already crushed so I was unable to save the whole machine even though I really wanted to. Is it remotely possible to convert my GWL11 to the LED Panel model WL42T26DW1? I want to get cleaner clothes than the LG but save a little water. I can also use the auto level on the Ecosmart panel with the washplate or the medium level. Just thought I could use the Aquasmart parts to make it work perfectly. I would just have the bleach and softener hoses zip tied over the wash tub top so they just dump extra water in when they would normally flush.
| ||
|
Post# 1109480 , Reply# 1 2/24/2021 at 23:06 (1,146 days old) by DADoES  (TX, U.S. of A.) |
||
 No. AquaSmart takes a different pump, which requires a different tub to mount it. The AquaSmart motor board cannot run the GWL11 pump. The SmartDrive motor electrical characteristics are different on GWL11 (Phase 6) and AquaSmart (Phase 7 or higher). The AquaSmart board cannot run the GWL11 motor. See the label on the AquaSmart motor board, S7SPL? That means Series/Phase 7, Smart Pump, Low profile agitator. There are some other differences but that's enough. | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}