Just wanted to make this thread so hopefully it helps someone else out. Have a ASKO W8844XL with a Wash Motor Fault. Problem was the Inverter board P/N 271987. I ordered a replacement from wcpdistributing.com. They were very helpful. Long story short, all I could find online was saying it was the washer motor, I took it all apart, ohmed out the motor which was good, dug a little deeper and found the inverter board fried. Not hard to change, remove the back panel, its on the bottom standing on its side in a white plastic housing with one screw, and few electrical connectors with cable ties.
Comes to the Rescue!
;){kind=link}
;){kind=link}