|
Thread Number: 86818
/ Tag: Vintage Dishwashers
Increasing fill time on timed fill dishwasher |
[Down to Last] |  |
|
| Post# 1113846 , Reply# 1 4/5/2021 at 22:53 (1,115 days old) by Maytagbear (N.E. Ohio) | ||
|
Is your water pressure otherwise OK? You might have sediment in the supply line. Lwrence/Mytagbear | ||
Post# 1113856 , Reply# 2 4/6/2021 at 00:47 (1,115 days old) by Adam-aussie-vac  (Canberra ACT) |
||
|
My water pressure is okay They just never seems to be enough water and that’s the only issue | ||
| Post# 1113859 , Reply# 3 4/6/2021 at 01:35 (1,115 days old) by gizmo (Victoria, Australia) | ||
|
What is the inflow like? If it is filling slow, your inlet valve strainer may be a bit blocked, or the rubbers in the solenoids may be getting old and hard. (very common.) I'd try replacing the solenoid with a known-good one.
Is it definitely timed fill? It looks too new for such old-fashioned technology. Is there no pressure switch? | ||
|
Post# 1113861 , Reply# 4 4/6/2021 at 03:27 (1,115 days old) by Adam-aussie-vac (Canberra ACT) |
||
|
There’s no pressure switch on it, and it fills For roughly about 11 seconds | ||
|
Post# 1113873 , Reply# 5 4/6/2021 at 07:45 (1,115 days old) by eronie (Flushing Michigan) |
||
|
If this is a small machine that sits on the counter and connects to the faucet try cleaning the areiator on the faucet. Could be full of grit. | ||
|
Post# 1113929 , Reply# 6 4/6/2021 at 17:02 (1,114 days old) by Adam-aussie-vac (Canberra ACT) |
||
|
It’s not the aerator, it’s hooked up to a hot water line I’ll check the filter when I get home | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
