Thread Number: 87511
/ Tag: Vintage Automatic Washers
Kenmore Belt Drive Tub Rings |
[Down to Last] |
Post# 1120738   6/18/2021 at 22:52 (1,040 days old) by drummerboy928 (Illinois)   |   | |
Checkrate/Likes
 
     
Recently i’ve been in the market for a replacement tub ring for my 1983(i think) Kenmore 70 series belt drive washer. After years of neglect by the previous owner, the metal snubber plate has rusted away and crumbled into basically dust as soon as I tried to clean it. I’d like to replace it with one with the waterfall lint filter from a similar year Kenmore or Whirlpool belt drive but is it possible? I know i’d need to make a lot of changes to this washer, including a new recirculation pump, but if it’s possible Id like to do it since it’ll need a new tub ring anyways. Any help or advice would be greatly appreciated.
|
|
Post# 1120739 , Reply# 1   6/18/2021 at 23:37 (1,040 days old) by Yogitunes (New Jersey)   |   | |
Checkrate/Likes
 
     
well of course you will need the tub ring with the built in lint filter...
and most likely your pump already has the 3rd port.... all you need is a length of hose to connect the two... I have converted several machines like this... CLICK HERE TO GO TO Yogitunes's LINK on eBay
View Full Size
|
Post# 1120740 , Reply# 2   6/18/2021 at 23:45 (1,040 days old) by Yogitunes (New Jersey)   |   | |
Checkrate/Likes
 
     
you may need this too....but shop around for best pricing...
CLICK HERE TO GO TO Yogitunes's LINK on eBay |
Post# 1120788 , Reply# 3   6/19/2021 at 15:08 (1,039 days old) by drummerboy928 (Illinois)   |   | |
Checkrate/Likes
 
     
|