|
Thread Number: 87713
/ Tag: Modern Automatic Washers
Maytag Neptune Coin Op |
[Down to Last] |  |
Post# 1122840 7/10/2021 at 06:07 (1,018 days old) by HobartHero  (New York) |
||
These look decent and the owner of the property I manage wants to stick with coin op machines, so this might be a decent way to go. They are asking $650 for the set, I’m thinking they’ll take $500. Is that a good price point for a washer/dryer commercial set? Any problems/wear points to look or listen for when checking them out?
-Shannon CLICK HERE TO GO TO HobartHero's LINK
View Full Size
| ||
|
|
Post# 1122894 , Reply# 1 7/10/2021 at 20:55 (1,017 days old) by Yogitunes (New Jersey) |
||
 | ||
|
Post# 1122898 , Reply# 2 7/10/2021 at 22:50 (1,017 days old) by HobartHero (New York) |
||
|
Sarcasm?? | ||
|
Post# 1122901 , Reply# 3 7/10/2021 at 23:14 (1,017 days old) by Yogitunes (New Jersey) |
||
|
well in a commercial setting, you dont always have control over a machines usage....
the main thing I find is bearing/seal failure and/or the dreaded mold/mildew issue.... watch a few vids and learn how to put in new bearings....inexpensive and easy as pie.... even on the home units, there is no 'clean washer' cycle....actually has never needed one....the machine will clean itself....stick with Hot/Warm washes and LCB when needed for the load..... note, I dont clean my machines outside of a wax/polish and wipe down of the exterior.....I dont leave the doors or dispenser doors open.... at one point I had ten kids, they got a workout.....and still run flawless.... | ||
|
Post# 1122913 , Reply# 4 7/11/2021 at 03:27 (1,017 days old) by HobartHero (New York) |
||
|
Price | ||
|
Post# 1122927 , Reply# 5 7/11/2021 at 07:09 (1,017 days old) by Yogitunes (New Jersey) |
||
|
well anything is what someone is worth paying....
many coin op machines are usually only put up for sale once the warranty runs out...at least that is what they do with SQ machines...your going to have to investigate what coin-op machines go for... for one thing, I would put the washer into a spin cycle, that will tell you if it needs bearings or not... and is the dryer going to need cleaning out and serviced... and/or is there a warranty with these units?.... | ||
|
Post# 1122947 , Reply# 6 7/11/2021 at 10:43 (1,017 days old) by HobartHero (New York) |
||
|
No warranty | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}