Thread Number: 87759  /  Tag: Modern Automatic Washers
Lightning Strikes and Electronic Controlled Machines Pre 2007 and LG 2001-2009
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate automaticwasher.org if you make a purchase using any link to eBay on this page]
Post# 1123323   7/15/2021 at 00:38 (1,010 days old) by MaytagNeptune (FireAlarmTechGuy4444 on YouTube. Interlochen MI)        

maytagneptune's profile picture
I have this fear even though we have countless trees by our house "shielding" us from strikes because they are taller than out house. I still get this fear of lightning strikes. I unplug my Electronically controlled machines during storms but Is the washer safe or do I have to unplug the water inlet valve wiring harness and with a dryer with a metal duct outlet do I have to pull the dryer off the vent? I'm not concerned with mechanical Timer machines like my Direct Drive and 1-18 but I am concerned with my F&P W/D Set and my LG W/D set and Calypso and Neptune TL and WorldWasher. We have insurance but those boards are NLA and hard to find. F&P boards are very expensive and many are still available but a few are NLA at this age. I am pretty sure the GWL11/IWL12 SD11/P6CPE Board is still available and I have 4 spares but I don't want to fry any of them from a lightning strike. I have 1 spare dryer sensor module which is currently being used as the Intuitive console and the first gen sensor module won't cooperate with eachother.




Post# 1123327 , Reply# 1   7/15/2021 at 06:53 (1,010 days old) by appnut (TX)        

appnut's profile picture
I got a whole house surge protector installed March, 2020



This post was last edited 07/15/2021 at 07:53
Post# 1123328 , Reply# 2   7/15/2021 at 07:35 (1,010 days old) by chachp (North Little Rock, AR)        
I have been thinking about doing the same thing Bob.

chachp's profile picture

 

We had a hit a couple of years ago that took out our cable modem.  I had two computers directly connected to it and the network interfaces on both of them were fried.  Luckily, I have apple care on both that repaired the machines at no cost to me.


Post# 1123329 , Reply# 3   7/15/2021 at 09:11 (1,010 days old) by parunner58 (Davenport, FL)        

parunner58's profile picture
When we moved to Florida there was an insert in the electric bill about a whole house surge protection, it costs us $5.95 a month. We had one installed since so many things in the house now are fully electronic. We had a freak thunderstorm in February one year when we still lived in Pennsylvania. A power pole was struck on our street and our stereo was fried, even though it had a pretty expensive surge suppressor on it. The jolt zapped the first socket on the strip which was my receiver. Luckily Home owners paid for a new one. Down in Florida, i would not be without the whole house unit.

Post# 1123333 , Reply# 4   7/15/2021 at 10:43 (1,010 days old) by DADoES (TX, U.S. of A.)        

dadoes's profile picture
 
The incoming coax or other data line to a modem or TV box is also a source of zapping, which a surge suppressor on the power circuit doesn't defend.  I have an APC UPS which has an interface for the coax to pass through.

Whole-house and individual-circuit surge supressors don't last forever.  A supressor is effectively non-functional after handling accumulated surges that meet its rated protection level ... either multiple smaller surges or one large.

Surge protectors can't handle a direct lighting strike (or even one nearby on the mains circuit).  Lightning requires proper lightning-strike protection and it doesn't always work.


Post# 1123341 , Reply# 5   7/15/2021 at 12:48 (1,009 days old) by Yogitunes (New Jersey)        

yogitunes's profile picture
whenever possible....

the only sure fire way to protect equipment is to unplug it when not in use....

especially my Calypso....highly recommended by the tech, he also ran the traditional ground wire to the cold water pipe....it used to build up a static charge inside and cause the machine to come on by itself.....never had a problem since I unplug it...



Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy