Thread Number: 88423
/ Tag: Vintage Automatic Washers
Kenmore 110-20852990 Spin Issue? |
[Down to Last] |
Post# 1129833   9/28/2021 at 14:09 (934 days old) by BlockEight88 (Hobart, IN)   |   | |
Checkrate/Likes
 
     
Hello everyone. I recently brought my Kenmore 80 Series out of storage and noticed that during the spin cycle the agitator seems wobbly. I am not sure if this is because the load was unbalanced, or what. Several months ago I attempted to remove the spanner nut, but was unsuccessful. I did ensure that everything was super tight before putting the agitator back on, so I am not sure if that's the issue. Or maybe there is nothing to worry about?
?t=1231 |
|
Post# 1129963 , Reply# 1   9/30/2021 at 06:52 (932 days old) by BlockEight88 (Hobart, IN)   |   | |
Checkrate/Likes
 
     
|
Post# 1129983 , Reply# 2   9/30/2021 at 09:57 (932 days old) by DADoES (TX, U.S. of A.)   |   | |
Checkrate/Likes
 
1    
|
Post# 1129986 , Reply# 3   9/30/2021 at 10:17 (932 days old) by BlockEight88 (Hobart, IN)   |   | |
Checkrate/Likes
 
     
|