Thread Number: 88932
/ Tag: Modern Automatic Washers
Speed Queen 2018 Washer (Model # TR3000WN) - Rinse and Wash Blkining 2x
|[Down to Last]|
|Post# 1134951   12/1/2021 at 08:53 by HalleluYAH (New York)  || |
Hi, first thank yuo for taking time out to read my post.
This washer is about 3 years old (just a few months past warranty, of course :).
We started getting the Wash/Spin blinking error a while ago, and we could just unplug the washer for 10 minutes, then plug back in and it would complete a cycle. Now, that no longer works. The washer fills fine, washes and agitates fine, but when it is time to spin and drain it stops, and this error appears. I try to manually run a rinse/drain cycle by holding down the reset button, and it drains for a few seconds, and then the error appears again. I left it unplugged overnight, and in the AM i was able to get it to run a full drain, and then error appears again.
Perhaps the belt is bad, or motor? any ideas? I attached the manual excerpt that pertains to this error code.
Thank you again in advance for taking time to read this.
View Full Size
|Post# 1134952 , Reply# 1   12/1/2021 at 09:49 by DADoES (TX, U.S. of A.)  || |
There are responses on your first posting of this question.
CLICK HERE TO GO TO DADoES's LINK