|
Thread Number: 88944
/ Tag: Vintage Dishwashers
A detailed look at the Power Clean |
[Down to Last] |  |
|
| Post# 1135098 , Reply# 1 12/2/2021 at 17:05 (868 days old) by Cam2s (Nebraska) | ||
|
Drain impeller installed.
View Full Size
| ||
| Post# 1135102 , Reply# 3 12/2/2021 at 17:16 (868 days old) by Cam2s (Nebraska) | ||
|
The pumping chamber without the wash impeller, the separation trough around it and the soil collection chamber around that. This is a second revision power clean, the first revision was basically the same other than the soil collection chamber itself.
View Full Size
| ||
Post# 1135127 , Reply# 5 12/2/2021 at 21:32 (868 days old) by lakewebsterkid  (Dayton, Ohio) |
||
|
Thanks! Very nice to see it all taken apart. Half way tempted to disassemble mine and see how clean it is for S&Gs. | ||
|
Post# 1135128 , Reply# 6 12/2/2021 at 21:48 (868 days old) by bradfordwhite (central U.S.) |
||
Nice Job
Excellent photos. I seen several Whirlpool dw pumps from the 70s through 90s but never had to take any apart. I always wondered what that piece was that stuck out.
They must be reliable. Most the problems I've seen on WP dws is the door seal leaking or the racks rusting. Compare that to D&M built dws from the 70s and 80s where the pump assembly was often messed up with a plethora of potential problems, racks rusted, door seal bad, hard water deposits, rust through on the tub, and rust on panels. | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}