Thread Number: 89521
/ Tag: Vintage Automatic Washers
Old Maytag A206 |
[Down to Last] |
Post# 1141284   2/5/2022 at 14:14 (782 days old) by tuxmax (Drummondville)   |   | |
Checkrate/Likes
 
     
Hi I get a old vintage Maytag washer A206 all working but the washer not change cycle autommatic i need force for do spin cycle and drain cycle |
|
Post# 1141291 , Reply# 1   2/5/2022 at 15:06 (781 days old) by qsd-dan (West)   |   | |
Checkrate/Likes
 
     
Is the timer hanging up and not advancing for the spin cycle? This post was last edited 02/05/2022 at 15:23 |
Post# 1141317 , Reply# 2   2/5/2022 at 16:48 (781 days old) by tuxmax (Drummondville)   |   | |
Checkrate/Likes
 
1    
the timer advance but when hear a click the washer not change fonction but if turn the roll manually i can change washer cycle function ps sorry for my bad english |
Post# 1141325 , Reply# 3   2/5/2022 at 17:18 (781 days old) by turquoisedude (.)   |   | |
Checkrate/Likes
 
2    
|
Post# 1141998 , Reply# 4   2/12/2022 at 18:12 (774 days old) by electronicontrl (Grand Rapids, MI)   |   | |
Checkrate/Likes
 
     
Does it continue to agitate through the pause following the wash phase? Something is preventing the run winding from dropping out. I'm thinking the timer. If you are near the machine and watch the timer advance from agitation to pause to spin (and it continues to agitate through out), push in on the timer knob and then pull it back out. Does it spin?
|