|
Thread Number: 89686
/ Tag: Vintage Automatic Washers
Maytag brake assembly not stopping tub |
[Down to Last] |  |
| Post# 1142894 2/23/2022 at 02:22 (790 days old) by scrubflex (bronx, new york) | ||
|
What can cause a new brake assembly to not stop the tub at the end of the spin cycles? Could too much oil jam up the brake assembly? Although I have new spin bearings, Brake Rotor, and Radial Ball I still manually have to turn the tub to start it spinning. | ||
|
Post# 1142904 , Reply# 1 2/23/2022 at 07:39 (790 days old) by combo52  (50 Year Repair Tech Beltsville,Md) |
||
???? Hi Harry, Is your washer not stoping at the end of spin or not starting to spin on its own ? or both ?
It may be that the lock key is not installed in the proper position on the bottom of the transmission shaft ?.
As many are finding out MT DC washers are one of the most difficult older machines to repair, this is why back in the day very few used washer shops ever bothered with them and kept rebuilding WP BD and GE FF machines instead.
John L. | ||
| Post# 1142909 , Reply# 2 2/23/2022 at 10:06 (790 days old) by qsd-dan (West) | ||
 | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
