Thread Number: 89792  /  Tag: Vintage Automatic Washers
What year exactly did Maytag switch from the classic center-dial design to the brown panel?
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate automaticwasher.org if you make a purchase using any link to eBay on this page]
Post# 1144142   3/9/2022 at 12:08 (750 days old) by WoodJack99 (Massachusetts/Virginia, USA)        

woodjack99's profile picture
I know it was around 1980, but the answers I've seen differ slightly. Some people say 1979, 1980, 1981. Perhaps the "transition" began in 79 and lasted until 81? I have seen center dials from 80, but I think by 81 they had gone completely to the new design.




Post# 1144143 , Reply# 1   3/9/2022 at 12:13 (750 days old) by peteski50 (New York)        
Maytag

peteski50's profile picture
They switched to the brown panel in 1980


Post# 1144144 , Reply# 2   3/9/2022 at 12:21 (750 days old) by swestoyz (Cedar Falls, IA)        

swestoyz's profile picture
Peter is spot on.

Per Maytag ---


  View Full Size
Post# 1144147 , Reply# 3   3/9/2022 at 12:53 (750 days old) by robbinsandmyers (Conn)        
A906

robbinsandmyers's profile picture
Looks like they made them 7 years. Im surprised more dont turn up. The A806 had a good long run though LOL

Post# 1144154 , Reply# 4   3/9/2022 at 14:08 (750 days old) by WoodJack99 (Massachusetts/Virginia, USA)        

woodjack99's profile picture
Thanks guys! I thought it was either 80 or 81. I guess by 81, they'd gone completely to the brown panel. Some people said 79, but that seemed a bit early to me.

Jack


Post# 1144160 , Reply# 5   3/9/2022 at 15:20 (750 days old) by wayupnorth (On a lake between Bangor and Bar Harbor, Maine)        

wayupnorth's profile picture
I know that when I bought my 511 washer and 410 dryer in 1983 that every Maytag in the showroom had a brown panel without the box around the logo and Heavy Duty line. They still run like new and only one $28 part for the washer. Thats nearly 40 years I have had them and I will never part with them.

Post# 1144183 , Reply# 6   3/9/2022 at 19:26 (749 days old) by Repairguy (Danbury, Texas)        

repairguy's profile picture
Picked up a DE610 this morning built in March of 1982. I like the look of the center dial machines and the 10 series models with the wood grain panels and white knob/buttons.

Post# 1144195 , Reply# 7   3/9/2022 at 22:30 (749 days old) by Tomturbomatic (Beltsville, MD)        

The story was that they wanted them to look like the dishwasher control panel. I thought that it made them look like Montgomery Ward machines.

Post# 1144218 , Reply# 8   3/10/2022 at 08:00 (749 days old) by woodjack99 (Massachusetts/Virginia, USA)        

woodjack99's profile picture
@Tomturbomatic

That’s very interesting to know. Some people thought they looked a bit “boring” compared to the center-dials, but I think they fitted with the times better. They looked 80s, and the center-dials looked 70s.


Post# 1144219 , Reply# 9   3/10/2022 at 08:01 (749 days old) by gansky1 (Omaha, The Home of the TV Dinner!)        

gansky1's profile picture

 

 

We went to purchase a new washer to replace the 72 GE FF and a new dishwasher to replace the months-gone KM Roto-Rack in February 1981.  The store was clearing out the last of the center-dial models, mostly dryers by that point.  We bought a 110, BOL washer and a Maytag portable dishwasher.  Maytag offered two port/conv models, one with sani-wash and the low end with just a heat dry option (two buttons).  Naturally, to prevent "trouble with all the doo-dads" bought the lower end model.  


Post# 1144238 , Reply# 10   3/10/2022 at 13:05 (749 days old) by RP2813 (Sannazay)        

rp2813's profile picture

Tom, you made my day by using "Montgomery Ward" as a derogatory term -- not just in general but particularly when applied to their dreadful line of laundering equipment!


Post# 1144243 , Reply# 11   3/10/2022 at 14:21 (749 days old) by whitetub (Montreal, Canada)        

When they switched from the center dial panel to the brown panel, I was a little sad.
But they were the same machine under the hood. So I moved on.

But when they switched the dishwashers, and put the glasses in the top rack, I was shocked. I never recovered completely from that move. lol....


Post# 1144252 , Reply# 12   3/10/2022 at 15:50 (749 days old) by maytaga806 (Howell, Michigan)        

The 80s Maytags with the chrome rim and golden rim frame around the control panel was absolutely luxurious, and the golden dial as well. You won’t find any of that on the new machines, it’s all fake plastic junk. Cannot wait to find one of these 80 generation Maytags, my absolute favorite!! I believe they stopped production in 88 and switched to the new orbital design, somewhere around there.

Post# 1144294 , Reply# 13   3/11/2022 at 12:07 (748 days old) by Good-Shepherd (New Jersey)        
80's Maytag

Glossy consoles were also more durable.

Center dial switches yellowed, lettering would wear off, paint faded.

Glossy consoles clean up nicely with polishing compound and some elbow grease.


Post# 1144299 , Reply# 14   3/11/2022 at 12:34 (748 days old) by qsd-dan (West)        
Glossy consoles were also more durable.

qsd-dan's profile picture

Agreed, the 80's consoles...most notably the 84-89 era...were the most durable Maytag ever produced and they age very gracefully.

 

As noted above, the buttons on the 66-79 center dials would yellow under the wrong conditions and the lettering on the buttons would wear under high use or from the OCD housewife. The console paint from 1957-1979 would easily wear through with too many cleanings, aggressive cleaners, or just a hint too much scrubbing. The early 90's flat black consoles didn't wear very well and were prone to fading, especially if pretreatments of garments were sprayed near the console. Some consoles of the white era of the mid 90's to the end of production, especially the grained hard plastic surroundings, would yellow overtime.


Post# 1144301 , Reply# 15   3/11/2022 at 12:49 (748 days old) by RP2813 (Sannazay)        

rp2813's profile picture

To add to what Dan stated directly above, the logos on the CD models didn't hold up well to cleaning.  As much as I like the classic look of CD machines, particularly the 806 models with fully lit consoles, I have to agree that the 12 series consoles were upscale with their gold trim, but I still prefer the look of the white buttons on the 10 series.

 

I jumped on a 712 machine five or six years ago after determining that it wasn't an orbital model and have no regrets.  I have plenty of overhead lighting in the basement where the 712 and my mostly analog Neptune stacked set live.


Post# 1144375 , Reply# 16   3/12/2022 at 12:28 (747 days old) by Tomturbomatic (Beltsville, MD)        
They were not entirely the same machines

With the change, the TOL machine lost a lighted control panel and the Delayed Bleach Injection System fill port was moved to the other side of the opening and the reservoir which slowly metered bleach into the machine through the pump was eliminated and the hose from the fill opening on the left went directly down to the outer tub.

When I see the word "delux" the Latin word "lux" for light jumps out at me and growing up when I did, deluxe appliances had lighting or lighted features not seen in models lower down the line. I think one of the most dramatic and possibly the first examples of this in my life was the early 50s Westinghouse range belonging to some friends and when a surface unit was switched on, the fluorescent light on the control panel came on to not only alert the user that a surface unit was on, but also to illuminate the color of the heat setting selected.


Post# 1144376 , Reply# 17   3/12/2022 at 13:15 (747 days old) by qsd-dan (West)        

qsd-dan's profile picture

the Delayed Bleach Injection System fill port was moved to the other side of the opening and the reservoir which slowly metered bleach into the machine through the pump was eliminated and the hose from the fill opening on the left went directly down to the outer tub.

 

That was already implemented in early 1975.


Post# 1144379 , Reply# 18   3/12/2022 at 14:08 (747 days old) by Hippiedoll ( arizona )        
I'm confused...

hippiedoll's profile picture
According to the chart in reply #2,
In 1976, Maytag made an A407 and an A408.
What would be the difference?

Aren't those 2 basically the same model of washer, except maybe the 407 has a pilot light(?) And 3 wash Temps with all cold rinses?
Am I missing something here??
🤔


Post# 1144394 , Reply# 19   3/12/2022 at 16:40 (747 days old) by qsd-dan (West)        

qsd-dan's profile picture

In 1976, Maytag made an A407 and an A408.
What would be the difference?

Mid year change where both machines overlapped in 1976. Same thing happened to 207/208.

Interesting that the 606 didn't morph into a 608 until 1977.


Post# 1144460 , Reply# 20   3/13/2022 at 14:42 (746 days old) by chaskelljr2 (Washington, D. C.)        

1980

—Charles—



Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy