Thread Number: 91028  /  Tag: Modern Automatic Washers
Maytag Steam X front loader sometimes dosent spin during rinsing
[Down to Last]

Cool Washer Stuff on Amazon:
scroll >>> for more items
Post# 1155394   7/28/2022 at 12:45 by ajfanthony (ALTAVISTA)        

Half the time my washer dosent want to spin during the rinse cycle after it did all the washing. Itll just sit there and make a low hum noise and pause the time. I
took the back off and check if it was clogged, few quarters in there and drained it with a few gallons of water to make sure its clear. I then reset it according to the manual and it did all the cycles. Ran it with a single pair of pants, went smooth. Tried washing more stuff and it always go back to stopping. I then try drain and spin cycle and it does nothing but lock the door. Then i unplugged the power for 3 minutes. Tried it again and drain and spin work. I tried closing the door multiple of ways since it does have sag so i lift it and closed it,adjusted door latch so it aligns. I did everything i can think of. Not sure if its electrical problem or the sensor where the latch goes into. It runs fine now after 30 minutes of turning it off and on and testing out the drain and spin cycle. Wife pushing me to hire someone to fix it but if they dont see a problem , they cant fix it. Not sure if this is normal for a washer but when i try a normal cycle, it will lock, then unlock then it will lock again then it will begin washing. I want to blame it on a faulty lock switch.


Post# 1155405 , Reply# 1   7/28/2022 at 16:38 by DADoES (TX,†U.S. of A.)        

dadoes's profile picture

The lock, unlock, lock sequence at Start of a cycle is normal. Itís a safety feature as a warning to a child inside that the machine is starting. Should do that on all cycle choices.


Post# 1155414 , Reply# 2   7/28/2022 at 18:36 by Pierreandreply4 (St-Bruno de montarville (province of quebec) canada)        
i have a top load washer as daily driver

pierreandreply4's profile picture
i have a top load maytag as daily driver it check the lock at start of cycle and when spin sequance arrive doyble check the lock as a safety precaution by doing the lock unlock sound

  View Full Size
Post# 1155421 , Reply# 3   7/28/2022 at 19:22 by GELaundry4ever (Killeen tx USA)        
cycle

What cycle does it occur on?


Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy