Thread Number: 91199  /  Tag: Modern Automatic Washers
Speed Queen AWN542 Temp switch replacement
[Down to Last]

Cool Washer Stuff on Amazon:
scroll >>> for more items
Post# 1157128   8/16/2022 at 21:05 by Llmaytag (Southern California)        

llmaytag's profile picture
Recently the temperature switch on my Speed Queen AWN542 started acting up. During full for the wash, only hot injects. When the selector is on cold, nothing injects. On warm or hot, only hot injects. For one load I had to put the dial to one of the rinses and once it filled I put it back to wash. A couple times when I would start a wash cycle the cold would begin to inject for a few seconds but then would stop, so Iím sure the switch must be replaced.

The same thing happened to me perhaps 20 years ago or more on a Maytag Dependable Care and I replaced the temperature selector myself without too much frustration, (iím not really the best repair guy type). Has anyone here had experience replacing the temperature switch on one of these spSpeed Queen models, like the AWN542?

Thanks!


Post# 1157136 , Reply# 1   8/16/2022 at 21:37 by combo52 (50 Year Repair Tech Beltsville,Md)        

combo52's profile picture

It might be a loose wire on the Sw or inlet valve or a bad inlet valve, try reversing the inlet hoses on the washer and see what happens.

 

If you then get cold water on hot and no hot water you probably have a bad TS, if you still only get hot water but on the cold setting now you have a bad inlet valve.

 

John L.


Post# 1157143 , Reply# 2   8/16/2022 at 22:34 by Llmaytag (Southern California)        

llmaytag's profile picture
Thank you very much for that suggestion, a loose wire on the switch makes perfect sense to me. Iím inclined to think that itís the switch as opposed to the inlet valve because on any of the rinse cycles the cold water always injects without interruption, but on the wash the cold sometimes doesnít inject at all, or will inject for a few seconds then stop.

Post# 1157164 , Reply# 3   8/17/2022 at 06:28 by combo52 (50 Year Repair Tech Beltsville,Md)        

combo52's profile picture

More likely A Temp Sw then, you can check for loose connections still before replacing.

 

John L.


Post# 1157450 , Reply# 4   8/20/2022 at 18:56 by Llmaytag (Southern California)        

llmaytag's profile picture
Itís been working in the last week so I havenít taken it apart yet, but I definitely will before replacing the switch.


Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy