|
Thread Number: 92147
/ Tag: Classified Ad Finds
a candidate for ugliest dishwasher |
[Down to Last] |  |
Post# 1167100 12/20/2022 at 13:24 (489 days old) by reactor  (Oak Ridge, Tennessee-- ) |
||
Came across this on FB Marketplace. I have never seen seen this version of the Jenn-Air dishwasher. Is it me, or is this a prime contender for one of the ugliest dishwashers? lol
CLICK HERE TO GO TO reactor's LINK
View Full Size
This post was last edited 12/20/2022 at 14:25 | ||
|
| Post# 1167103 , Reply# 1 12/20/2022 at 13:41 (489 days old) by qsd-dan (West) | ||
 | ||
|
Post# 1167105 , Reply# 2 12/20/2022 at 14:13 (489 days old) by coldspot66 (Plymouth, Mass) |
||
|
That's not a Kitchenaid platform dishwasher. It's a Maytag standard tub product of the times. could be of the Jetclean series. | ||
|
Post# 1167109 , Reply# 3 12/20/2022 at 14:48 (489 days old) by reactor (Oak Ridge, Tennessee-- ) |
||
|
correction | ||
| Post# 1167114 , Reply# 4 12/20/2022 at 16:06 (489 days old) by MattHavertown (Havertown, PA) | ||
|
Almost One appliance store had this model in stock for years after it was manufactured. Inside it’s a Maytag jet clean but outside is all it’s own “style” I think the maytags were a lot more popular. | ||
| Post# 1167115 , Reply# 5 12/20/2022 at 17:43 (489 days old) by Awooff (Peoria, Illinois) | ||
Jennair | ||
|
Post# 1167140 , Reply# 6 12/20/2022 at 21:57 (489 days old) by Tomturbomatic (Beltsville, MD) |
||
|
The inside is like the Maytag I have. It does not have a very flexible loading pattern. I would say the outside has Edsal lines. I wonder if spills run into the controls. | ||
| Post# 1167154 , Reply# 7 12/21/2022 at 08:07 (488 days old) by seeitrun2006 (Commerce, GA) | ||
|
Jenn aire/Maytag This is a re-badged Maytag reversed rack sold as a Jenn Aire dishwasher. These came out right after Maytag bought up Jenn Aire. | ||
|
Post# 1167299 , Reply# 8 12/23/2022 at 11:54 (486 days old) by Tomturbomatic (Beltsville, MD) |
||
|
Those are not reverse racks. That is the style that came out after the Reverse Rack machines. | ||
| Post# 1167431 , Reply# 9 12/24/2022 at 12:10 (485 days old) by Seeitrun2006 (Commerce, GA) | ||
|
Oops! Tomturbomatic You are correct! I didn’t pay close attention to the racks. My bad!!! | ||
|
Post# 1167598 , Reply# 10 12/26/2022 at 20:24 (483 days old) by combo52 (50 Year Repair Tech Beltsville,Md) |
||
I have a customer in town with a black one of these It doesn’t look quite as bad in black, but you can see why it didn’t sell. Somebody didn’t bother to do any market research on this ugly design.
Maytag had a lot of trouble with this design with the stainless steel tank. The metal was so sharp that it would cut through the wiring harness in the door hinge area, it will often short out and blow a fuse but at least it didn’t start a fire like the plastic tub models, so there was no recall on the stainless steel models.
The only real hazard was if the dishwasher was not grounded you might get electrocuted.
These were fairly good Dishwashers didn’t hold a whole lot and had washability problems in the upper rack because of no decent spray for the upper rack from below but were fairly rugged.
John | ||
|
Post# 1167648 , Reply# 11 12/27/2022 at 12:28 (482 days old) by bajaespuma (Connecticut) |
||
My candidate Not an attractive machine, outside and in:
View Full Size
| ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
