Thread Number: 93434  /  Tag: Vintage Dishwashers
new and vintage 18" compact dishwashers
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate automaticwasher.org if you make a purchase using any link to eBay on this page]
Post# 1181181   5/23/2023 at 10:02 (310 days old) by firedome (Binghamton NY & Lake Champlain VT)        

firedome's profile picture
We may be looking at having to replace the 18" GE compact dishwasher at our summer camp. Like the 18" Frigidaire at home it's made in China, however with a mechanical timer, the one at home is processor controlled, otherwise construction seems to be the same. The problem seems to be with the timer, we're looking into it.

I've heard that most, if not all, compact dishwashers currently made are produced mainly by 1 company... (Danby?) Is this true, and does anyone know if there's any real choice in new ones from actual different makers? Appliance dealers seem to know nothing except for price and availability. It's really difficult to ascertain who actually makes them, and there's a ton of weird brand names: out there: Zline, Edgestar, Fotile, SPC, Galanz, Kucht, Hava, Danby &c, probably of Chinese origin. GE, Whirlpool and Frigidaire are still there, but who makes them? Bosch, Miele are there, but we don't prefer German brands for parts and service reasons here in Vermont. Prices for 18"s start around $500 and up to $1400... way expensive at the top for something that will be used maybe 40 days a year at most. Opinions? JohnL?

Did KA/Hobart ever make a compact (18" wide) dishwasher, did other legacy US makers like Whirlpool or Maytag?





Post# 1181184 , Reply# 1   5/23/2023 at 10:36 (310 days old) by combo52 (50 Year Repair Tech Beltsville,Md)        
18 inch Dishwashers

combo52's profile picture
Hi Roger, unfortunately, no legacy US maker ever made 18 inch dishwashers, of course D&M initiated 18 inch dishwashers in the US but I’d call that more of a tragedy.

After WC, I got a hold of D & M they got a little bit better with the plastic tape models, but the pump was still pretty weak and they didn’t perform very well. The tub was too deep front to back

Other than that everything comes out of China. I don’t think Danby made their own etc. but it may be made by the same company.

If you have to buy one today, I’d probably buy the cheapest one probably doesn’t matter what names on it

If you supply the information for the current one with the bad timer, I might have a good used timer for it or of course check on eBay etc. for one if it’s not had hard use that hard it might be worth trying to fix it.

John


Post# 1181186 , Reply# 2   5/23/2023 at 11:47 (310 days old) by Tomturbomatic (Beltsville, MD)        

Aj Madison has Miele 18 inch dishwashers in stock. Home Depot and Lowes have Bosch models. I have no idea where they are made.

CLICK HERE TO GO TO Tomturbomatic's LINK


Post# 1181188 , Reply# 3   5/23/2023 at 12:06 (310 days old) by foraloysius (Leeuwarden, Friesland, the Netherlands)        

foraloysius's profile picture
Not sure where these are made, but according to the Miele website dishwashers are made in Germany and the Czech Republic, at least according to their information in German.

Post# 1181189 , Reply# 4   5/23/2023 at 12:20 (310 days old) by foraloysius (Leeuwarden, Friesland, the Netherlands)        

foraloysius's profile picture
Here’s a link to the information in english about their production sites.

www.miele.com/en/com/prod...


Post# 1181195 , Reply# 5   5/23/2023 at 15:16 (310 days old) by Tomturbomatic (Beltsville, MD)        

Thank you, Louis!

Post# 1181196 , Reply# 6   5/23/2023 at 15:27 (310 days old) by Tomturbomatic (Beltsville, MD)        

Dishwasher manufacturing is mentioned under the Bielefeld, Germany location.

Post# 1181201 , Reply# 7   5/23/2023 at 16:33 (310 days old) by firedome (Binghamton NY & Lake Champlain VT)        
thanks all...

firedome's profile picture
"I'd call that more of a tragedy." LOL!

If its turns out to be a timer will do John. It's had light use and we do prefer to repair over replace.
I think the advice to get the cheapest new is good, we don't need bells & whistles.
German stuff is just a pain for parts and repair in Vermont, so no go (Miehle vacs... boo.)
Might be fine in Berlin or NYC but not here.

Will report back with the problem we find...thanks!

BTW our own PhilR from Quebec, with my"supervision"(ie watching/helping? lol), replaced the Sensi-Temp on our red '61 GE range yesterday using the correct 8" Calrod element and 5 button control unit, parts sourced from JohnL (several years ago), and now we have 2 big burners!... thanks John!



Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy