Thread Number: 93789
/ Tag: Vintage Automatic Washers
here we go again again 2 |
[Down to Last] |
Post# 1184365   7/7/2023 at 18:50 (561 days old) by bpetersxx (laf in on the banks of the Wabash River)   |   | |
Checkrate/Likes
 
     
having to deal with the Maytag dryer
Now the calypso washer have a problem the control console LED and time indicator have problems lighting up I thought the ribbon cable was loose and needed to be seated BUT The socket on the control board is loose Need advice on how to proceed Should replace that one board Both boards or the whole console entirely wo9rks fine otherwise except the bleach hose leaks once in a while due to the seal being bad |
|
Post# 1184494 , Reply# 1   7/9/2023 at 05:06 (560 days old) by combo52 (50 Year Repair Tech Beltsville,Md)   |   | |
Checkrate/Likes
 
     
If the socket on the board is loose, you can send it to course centric‘s and have it re-soldered.
I don’t understand why you would replace both boards the whole consul etc. do you have all these parts laying around? If you have the parts go ahead and replace everything, none of those three parts are still available but you can find good used ones if you want to look around for them Where the bleach hose attaches to the outer tub they had trouble with leaks. It’s very easy to take it apart clean everything up and use a very good sealant. When you lock it back into the tub, I would use 3M, marine sealant , John |
Post# 1184554 , Reply# 2   7/9/2023 at 19:53 (559 days old) by bpetersxx (laf in on the banks of the Wabash River)   |   | |
Checkrate/Likes
 
     
thanks John
tinkering with the Maytag in the background But and it is a big but I have a bigger problem than this The Calypso is totally dead I want to check it so i can use it and I pressed the buttons on the console but it will not start at all None of the buttons will turn it on So I gotta figure out what happened |
Post# 1184558 , Reply# 3   7/9/2023 at 20:26 (559 days old) by luxflairguy (Wilmington NC)   |   | |
Checkrate/Likes
 
3    
This should and could be in ONE thread! Please don't start another about the same shit different day! |
Post# 1184635 , Reply# 4   7/10/2023 at 19:40 (558 days old) by bpetersxx (laf in on the banks of the Wabash River)   |   | |
Checkrate/Likes
 
1    
|
Post# 1184903 , Reply# 5   7/14/2023 at 19:43 (554 days old) by bpetersxx (laf in on the banks of the Wabash River)   |   | |
Checkrate/Likes
 
1    
|
Post# 1185187 , Reply# 6   7/18/2023 at 13:01 (551 days old) by bpetersxx (laf in on the banks of the Wabash River)   |   | |
Checkrate/Likes
 
1    
|
Post# 1185204 , Reply# 7   7/18/2023 at 17:43 (551 days old) by Adam-aussie-vac (Canberra ACT)   |   | |
Checkrate/Likes
 
1    
|
Post# 1185692 , Reply# 8   7/23/2023 at 21:32 (545 days old) by bpetersxx (laf in on the banks of the Wabash River)   |   | |
Checkrate/Likes
 
1    
|
Post# 1185697 , Reply# 9   7/23/2023 at 22:13 (545 days old) by DADoES (TX, U.S. of A.)   |   | |
Checkrate/Likes
 
1    
|
Post# 1185913 , Reply# 10   7/26/2023 at 15:06 (543 days old) by bpetersxx (laf in on the banks of the Wabash River)   |   | |
Checkrate/Likes
 
     
|
Post# 1187164 , Reply# 11   8/8/2023 at 22:22 (529 days old) by bpetersxx (laf in on the banks of the Wabash River)   |   | |
Checkrate/Likes
 
     
|
Post# 1188189 , Reply# 12   8/22/2023 at 14:19 (516 days old) by bpetersxx (laf in on the banks of the Wabash River)   |   | |
Checkrate/Likes
 
     
|
Post# 1190568 , Reply# 13   9/24/2023 at 15:47 (483 days old) by bpetersxx (laf in on the banks of the Wabash River)   |   | |
Checkrate/Likes
 
     
|
Post# 1191410 , Reply# 14   10/6/2023 at 19:51 (470 days old) by bpetersxx (laf in on the banks of the Wabash River)   |   | |
Checkrate/Likes
 
     
|
Post# 1192226 , Reply# 15   10/19/2023 at 18:02 (458 days old) by bpetersxx (laf in on the banks of the Wabash River)   |   | |
Checkrate/Likes
 
     
here is is
Need to know if this is acceptable need to figure out why it is narrow CLICK HERE TO GO TO bpetersxx's LINK |
Post# 1192234 , Reply# 16   10/19/2023 at 21:54 (457 days old) by DADoES (TX, U.S. of A.)   |   | |
Checkrate/Likes
 
     
|
Post# 1192421 , Reply# 17   10/22/2023 at 23:29 (454 days old) by rodknock95 (Salem, Missouri)   |   | |
Checkrate/Likes
 
     
I have never seen one of those. Wow |
Post# 1192433 , Reply# 18   10/23/2023 at 10:14 (454 days old) by DADoES (TX, U.S. of A.)   |   | |
Checkrate/Likes
 
1    
|
Post# 1192534 , Reply# 19   10/25/2023 at 11:08 (452 days old) by bpetersxx (laf in on the banks of the Wabash River)   |   | |
Checkrate/Likes
 
     
|
Post# 1192536 , Reply# 20   10/25/2023 at 12:45 (452 days old) by bpetersxx (laf in on the banks of the Wabash River)   |   | |
Checkrate/Likes
 
     
|
Post# 1192537 , Reply# 21   10/25/2023 at 12:48 (452 days old) by bpetersxx (laf in on the banks of the Wabash River)   |   | |
Checkrate/Likes
 
     
|
Post# 1192538 , Reply# 22   10/25/2023 at 12:50 (452 days old) by bpetersxx (laf in on the banks of the Wabash River)   |   | |
Checkrate/Likes
 
     
|
Post# 1192580 , Reply# 23   10/26/2023 at 13:48 (451 days old) by bpetersxx (laf in on the banks of the Wabash River)   |   | |
Checkrate/Likes
 
     
the machine controller board is bad
In the troubleshooting book Page 56 Motor and Motor Control System Test Machine control relay 4.Set the probes of a volt-ohmmeter between P16-5 (BK/WH) and P16-1 (WH/BU) on the ma- chine controller. Start the washer by pressing HEAVY DUTY and then START. Confirm that 120VAC is present when the relay clicks closed. Press STOP/CANCEL twice to stop the cycle. test 4 fails press Heavy duty but no start no relay click no beeps when button is pressed |
Post# 1192581 , Reply# 24   10/26/2023 at 14:28 (451 days old) by DADoES (TX, U.S. of A.)   |   | |
Checkrate/Likes
 
1    
|
Post# 1192583 , Reply# 25   10/26/2023 at 15:02 (451 days old) by bpetersxx (laf in on the banks of the Wabash River)   |   | |
Checkrate/Likes
 
     
|
Post# 1192627 , Reply# 26   10/27/2023 at 13:16 (450 days old) by bpetersxx (laf in on the banks of the Wabash River)   |   | |
Checkrate/Likes
 
2    
|
Post# 1192660 , Reply# 27   10/28/2023 at 09:40 (449 days old) by bpetersxx (laf in on the banks of the Wabash River)   |   | |
Checkrate/Likes
 
     
|
Post# 1192666 , Reply# 28   10/28/2023 at 13:21 (449 days old) by luxflairguy (Wilmington NC)   |   | |
Checkrate/Likes
 
2    
Haven't a clue what 7 trigfyul.ft means! |
Post# 1193200 , Reply# 29   11/8/2023 at 05:24 (438 days old) by bpetersxx (laf in on the banks of the Wabash River)   |   | |
Checkrate/Likes
 
     
|