Thread Number: 97916  /  Tag: Modern Automatic Washers
Ideal Washer Control Panel
[Down to Last]
Post# 1228698   4/13/2025 at 14:17 by Chetlaham (United States)        

chetlaham's profile picture

How do you imagine your ideal washer control panel if you could have anything you asked for or wanted built to perfection with no strings attached? How many knobs? What cycles? What options? Few settings or many? Lights? Indicators? Buzzers? Color scheme? Chrome? Folding panels? Piano keys? 

 

There are no limits, as little or as much as you desire. 

 

 

Personally I am an extreme ludite. The washer I imagine would have only have the bare basics I use, pre-wash, wash, rinse and spin. A fabric knob based on the sorted load I am washing. Variable water level for all load sizes. White on black with grey. 5 colored indicator lights run-soak-wash-rinse-spin. Easy grip rubber knobs, deep satisfying clicks, sturdy clunk-clunk-clunk EM timer. Metal fascia with glossy scratch resistant coating. Embossed company emblem.     

 

 

Ok, maybe I'd prefer chrome trim with turquoise, bright colors, lighted console, metal knobs and a mid century look. But it wouldn't match my current color scheme going on through out the house hence the bland vanilla. My apologies for fantasizing about to opposite extremes lol.      

 

 

 





Post# 1228715 , Reply# 1   4/13/2025 at 17:06 by Pierreandreply4 (St-Bruno de montarville (province of quebec) canada)        
this would be my ideal controls for a washer

pierreandreply4's profile picture
this would be my ideal control panel no lid lock for the lid side opening lid with a glass to see or check on the wash when needed all brands with wash rinse speed selector depending on fabric

  View Full Size
Post# 1228722 , Reply# 2   4/13/2025 at 17:37 by Chetlaham (United States)        

chetlaham's profile picture

I like your tastes. I think Kenmore had the best control panel designs since the 60s. Every decade had something eye catching to them but in their own unique way.  


Post# 1228724 , Reply# 3   4/13/2025 at 18:05 by GELaundry4ever (Nacogdoches, TX, USA (considering moving to Temple, Texas))        
control panel

first would be buttons consisting of sturdy cottons at the top, wrinkle free for the middle, and the bottom button would be for delicate nits. The second knob will be for load size, and the third would for temp. the fourth one would be for the actual cycles.

Post# 1228727 , Reply# 4   4/13/2025 at 18:37 by Chetlaham (United States)        

chetlaham's profile picture

Nice. I love GE's chrome push buttons, they're like the frosting on a cake.


Post# 1228773 , Reply# 5   4/14/2025 at 08:15 by Mrstickball (Ohio, USA)        

Pierre has my answer. Kenmore Elite 80 series top. I'd consider replacing the knobs with something like a stainless steel, or the Whirlpool ebony/stainless VMW knobs they used between (I think) 2013-2016.

I would then integrate the lid of a WT8400CB from LG - its sleek, stylish, and looks pretty nifty.


Post# 1228878 , Reply# 6   4/15/2025 at 10:18 by me (Essex, UK)        

My favourite control panel is still the Hotpoint Microtronic X2000 my mum got in about 1980. I liked the nice sized, clearly labelled, tactile buttons, particularly the non latching centre 4 buttons that interfaced to the MCU. The programme numbers 1 - 8 corresponded to the numbers on standard British clothing care labels of the time, which were ordered by wash action, then temperature, so if doing a mixed wash, you'd just select the highest care label number from the labels for the programme number. Programme selection was a bit clunky, eg no back button, likely due to the very basic 4-bit microcontroller with very little memory. (A Texas Instruments chip, if I recall correctly), it was only the second or third microprocessor controlled washing machine on the UK market. The button to pop open the door was also quite neat, it was the old mechanical cable operated sort with a sprung "pecker" that pressed on the belt over the pulley so it would be flipped out of the way and the door wouldn't open while the drum was turning, the cable also passed through a mechanical linkage for water level, so it wouldn't open once it was at the door level.


If I was designing one myself, I would have separate buttons to select the Cotton cycle, Synthetic, Wool/acrylic, and one for speciality washes, with RGB illuminated borders, which would turn green to show which wash is selected. It would have a button to step through the temperature options, one for spin speeds, one for extra rinse(s), and a start/cancel button. The display would show the fill water temperature and level while it is filling, the wash water temp. while heating and the spin rpm while spinning along with the chosen temperature and remaining time.

When you press a button to select the wash type it would automatically select the temperature and spin speed and other options you most commonly used for that cycle, unless you'd already pressed the temperature button to select the temperature in the prior minute or so, and same for other options. Press one twice and it would select your alternate settings you'd stored. Press the extra rinse button without a wash cycle selected to select rinse(s) on its own, followed by a spin, similar for the spin button.


  View Full Size

Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy