Thread Number: 12524
Free KitchenAid Dishwasher |
[Down to Last] |
Post# 219297   6/28/2007 at 22:44 (6,146 days old) by pdub (Portland, Oregon)   |   | |
Checkrate/Likes
 
     
|
|
Post# 219298 , Reply# 1   6/28/2007 at 22:45 (6,146 days old) by pdub (Portland, Oregon)   |   | |
Checkrate/Likes
 
     
|
Post# 219299 , Reply# 2   6/28/2007 at 22:47 (6,146 days old) by pdub (Portland, Oregon)   |   | |
Checkrate/Likes
 
     
|
Post# 219300 , Reply# 3   6/28/2007 at 22:49 (6,146 days old) by pdub (Portland, Oregon)   |   | |
Checkrate/Likes
 
     
|
Post# 219303 , Reply# 4   6/28/2007 at 22:56 (6,146 days old) by pdub (Portland, Oregon)   |   | |
Checkrate/Likes
 
     
|
Post# 219352 , Reply# 5   6/29/2007 at 06:04 (6,145 days old) by christfr (st louis mo)   |   | |
Checkrate/Likes
 
     
|
Post# 219425 , Reply# 6   6/29/2007 at 14:41 (6,145 days old) by christfr (st louis mo)   |   | |
Checkrate/Likes
 
     
|
Post# 219426 , Reply# 7   6/29/2007 at 14:54 (6,145 days old) by pdub (Portland, Oregon)   |   | |
Checkrate/Likes
 
     
This photo was taken a few months ago and everything has shifted but there are many new and cool machines lurking in there. I'll try and get a photo of the contents and post it. If no one wants this dishwasher it will be going to craigslist first, and then the crusher if it doesn't go as i don't have room for it and won't ever need it. I'm also going to sell a 1995 KDUS-23 Superba and a 1995 MOL plastic tub powerclean module Whirlpool dishwasher if any one is interested in either of those. Patrick |
Post# 219430 , Reply# 8   6/29/2007 at 15:26 (6,145 days old) by jons1077 (Vancouver, Washington, USA)   |   | |
Checkrate/Likes
 
     
|
Post# 219433 , Reply# 9   6/29/2007 at 16:20 (6,145 days old) by pdub (Portland, Oregon)   |   | |
Checkrate/Likes
 
     
|
Post# 219434 , Reply# 10   6/29/2007 at 16:37 (6,145 days old) by jons1077 (Vancouver, Washington, USA)   |   | |
Checkrate/Likes
 
     
|
Post# 219457 , Reply# 11   6/29/2007 at 19:32 (6,145 days old) by andrewinorlando ()   |   | |
Checkrate/Likes
 
     
Jon - If you're lucky enough to get the dishwasher, I have seen the motors on eBay many, many time....usually NIB for about $40 - $50. Best of luck....you will love it. |
Post# 219465 , Reply# 12   6/29/2007 at 20:28 (6,145 days old) by jons1077 (Vancouver, Washington, USA)   |   | |
Checkrate/Likes
 
     
|
Post# 219467 , Reply# 13   6/29/2007 at 20:50 (6,145 days old) by peteski50 (New York)   |   | |
Checkrate/Likes
 
     
My mom had this same machine for 25 years until 3 years ago and now owns a GE tall tub like I do. They certainly don't build them like this anymore. The cycles were long because both the first and last rinse heated to 150 before circulation. The drying or should I say NO Heat drying phase was about 40 minutes with the fan pulsating on and off. If you used Jetdry the drying results were good if not it was poor. Hobart only produced these models for about 1 1/2 years. They put the drying heater back in the 20 series. This was a very noisy dishwasher but built like a brick house. Peter |
Post# 219512 , Reply# 14   6/30/2007 at 01:14 (6,145 days old) by pdub (Portland, Oregon)   |   | |
Checkrate/Likes
 
     
|
Post# 219554 , Reply# 15   6/30/2007 at 09:33 (6,144 days old) by jons1077 (Vancouver, Washington, USA)   |   | |
Checkrate/Likes
 
     
|
Post# 220209 , Reply# 16   7/3/2007 at 06:20 (6,141 days old) by christfr (st louis mo)   |   | |
Checkrate/Likes
 
     
|