Thread Number: 15896
FOR SALE
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate automaticwasher.org if you make a purchase using any link to eBay on this page]
Post# 266069   2/21/2008 at 16:50 (5,908 days old) by gregm ()        

MAKE OFFER, '53 Unimatic, works perfectly, no leaks, no problems




Post# 266070 , Reply# 1   2/21/2008 at 16:51 (5,908 days old) by gregm ()        
next ...

inside ...

Post# 266071 , Reply# 2   2/21/2008 at 16:54 (5,908 days old) by gregm ()        
next...

MAKE OFFER, '61 Whirlpool, rebuilt, works fine, tub lights up as well as fluorescent light behind where it says "whirlpool" on left side of console. Also has ozone lamp.

Post# 266072 , Reply# 3   2/21/2008 at 16:55 (5,908 days old) by gregm ()        
next ...

inside ...

Post# 266073 , Reply# 4   2/21/2008 at 16:57 (5,908 days old) by gregm ()        
next ...

'61 Multi-matic, works fine last used a few months ago, outer tub patched

Post# 266074 , Reply# 5   2/21/2008 at 16:58 (5,908 days old) by gregm ()        
next ...

inside ...

Post# 266075 , Reply# 6   2/21/2008 at 16:59 (5,908 days old) by gregm ()        
next ...

MAKE OFFER '78 Frigidaire 1/18, works perfectly, no leaks / issues ...

Post# 266076 , Reply# 7   2/21/2008 at 17:00 (5,908 days old) by gregm ()        
next ...

inside ...

Post# 266077 , Reply# 8   2/21/2008 at 17:02 (5,908 days old) by gregm ()        
next ...

MAKE OFFER '64 Norge, works perfectly, except , gentle cycle or gentle speed does not work, otherwise all else with machine is fine

Post# 266078 , Reply# 9   2/21/2008 at 17:03 (5,908 days old) by gregm ()        
next ...

inside ...

Post# 266079 , Reply# 10   2/21/2008 at 17:05 (5,908 days old) by gregm ()        
next ...

parts ... make offer for the "LOT" ........ of mostly frigidaire parts dating back to the 40's mainly washer parts

Post# 266080 , Reply# 11   2/21/2008 at 17:06 (5,908 days old) by gregm ()        
next ...

more parts ... same bid/lot as above ...... just another box

Post# 266081 , Reply# 12   2/21/2008 at 17:13 (5,908 days old) by gregm ()        
next ...

SQ Vintage lit sign and working clock, MAKE OFFER

Post# 266082 , Reply# 13   2/21/2008 at 17:15 (5,908 days old) by gregm ()        
next ...

Norge vintage lit sign and working clock MAKE OFFER

Post# 266083 , Reply# 14   2/21/2008 at 17:17 (5,908 days old) by gregm ()        

'86 or '87 SQ set, in great shape but not mint consoles, however, not heavily used. Both work perfectly, MAKE OFFER ON SET, NOT sold individually.

Post# 266084 , Reply# 15   2/21/2008 at 17:18 (5,908 days old) by gregm ()        
next ...

inside washer ...

Post# 266085 , Reply# 16   2/21/2008 at 17:20 (5,908 days old) by gregm ()        
next ...

dryer... ELECTRIC

Post# 266086 , Reply# 17   2/21/2008 at 17:20 (5,908 days old) by gregm ()        
next ...

inside ...

Post# 266089 , Reply# 18   2/21/2008 at 17:37 (5,908 days old) by gregm ()        
how this works ..........

I am not necessarily looking for the highest bidder. I need the room more than I need the money and would like the machines to go to a good home where they will be used and enjoyed. Those who bid and we agree on a price the soonest and they can pickup the soonest means the most to me. Even though I put make offer, many will ask me to tell them how much I want for the machine. My answer to that will be >>> Please bid what you are comfortable bidding and what the machine is worth TO YOU. I have my reasons for doing it this way and it has worked to my benefit in the past. Those who are serious will negotiate with me. Those who make it a personal thing or issue or simply are not comfortable with making a first offer won't bid and that is fine. You will probably offer on the "lower side" and I will probably counter-offer on the "higher side" I don't take it personally as to how you bid or don't bid. Machines sold "as is", that does not mean there is something wrong. It means I cannot warranty or guarantee any of the machines so listed above after purchase. If there were or are any issues with the machines currently I would have stated such. Any other finer details including price or pickup can be negotiated when you email me directly at gregm978@aol.com ... thanks

Post# 266091 , Reply# 19   2/21/2008 at 18:25 (5,908 days old) by tuthill ()        
drooooooool

I can't wait until I'm older and get a real paying job so i can start collecting some of this stuff.

Post# 266092 , Reply# 20   2/21/2008 at 18:29 (5,908 days old) by jons1077 (Vancouver, Washington, USA)        
wow

jons1077's profile picture
sure wish I could snap the whirlpool

Post# 266097 , Reply# 21   2/21/2008 at 18:55 (5,908 days old) by gregm ()        
blackstone set

washer has minor, small leak during spin and needs new outer tub boot, I have the part, it just needs to be installed. Also the spring or part that pulls the agitator back down into locking position during the agitation phases should be replaced or maybe due to lack of use is not engaging/disengaging properly. Otherwise the machine works fine. Washer cab could use repainting, especially sides. Front is good. Dryer has never been plugged in or used. Brand new. Selling as a set only. MAKE OFFER PLEASE (see Post# 266089-2/21/2008-17:37 above for terms and conditions)

Post# 266099 , Reply# 22   2/21/2008 at 18:56 (5,908 days old) by gregm ()        
washer inside ...

top is off, but top is stainless steel like dryer and in excellent condition, dials light up, cap is loosely placed right now over agitator, that is why it looks crooked

Post# 266100 , Reply# 23   2/21/2008 at 18:57 (5,908 days old) by gregm ()        
dryer

mint !!

Post# 266101 , Reply# 24   2/21/2008 at 18:58 (5,908 days old) by gregm ()        
next ...

dryer inside, have owners manual too

Post# 266103 , Reply# 25   2/21/2008 at 19:05 (5,908 days old) by pulsator (Saint Joseph, MI)        

pulsator's profile picture
I sent you an email about the Unimatic!!!

Post# 266105 , Reply# 26   2/21/2008 at 19:27 (5,908 days old) by gregm ()        
62 EASY

I also have a '62 EASY automatic that is in really nice shape, but did work fine for about five minutes and then stopped. Its something in the motor and how it engages or disengages with the tranny. The motor does work, and I have yet to take or make the time to get into it so this machine is free to someone who can get it back and running again. I hate to throw it out.

Post# 266111 , Reply# 27   2/21/2008 at 20:03 (5,908 days old) by appnut (TX)        

appnut's profile picture
Greg, I can't believe some of these you wanna think about getting rid of to make more space. Some are eral gems.

Post# 266117 , Reply# 28   2/21/2008 at 21:08 (5,908 days old) by brent-aucoin ()        

Very nice machines Greg.
Love that Blackstone Dryer! It looks new!
Good luck with the sale.
Brent


Post# 266121 , Reply# 29   2/21/2008 at 21:52 (5,908 days old) by 70series ( Connecticut.)        

Oh GOD if only I could collect:

But unfortunately I cannot start collecting now, or I would take that Whirlpool.

Good Luck,
James


Post# 266124 , Reply# 30   2/21/2008 at 22:16 (5,908 days old) by mickeyd (Hamburg NY)        
Greg, you're killing me!!! The Easy's free??? Jesus,

mickeyd's profile picture
And those gorgeous Blackstones, the likes of which may never be seen again. I just might have to jump off the Peace Bridge. WEEEEEEEEEEEEEEEEEEEEEE

Post# 266140 , Reply# 31   2/22/2008 at 01:01 (5,908 days old) by washerlover (The Big Island, Hawai’i)        

washerlover's profile picture
I LOVE that Whirlpool and the Easy! My God, how much would shipping costs be from MA to northern CA???? Any idea?

Post# 266261 , Reply# 32   2/22/2008 at 22:00 (5,907 days old) by sambootoo (Moody, AL)        

You always have the neatest stuff for sale! Wish you lived closer.


Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy