|
Thread Number: 1941
806 lamp |
[Down to Last] |  |
Post# 64626 4/28/2005 at 11:41 (6,937 days old) by swestoyz  (Cedar Falls, IA) |
||
Hey guys - this shouldn't be too hard - but I'm looking to replace the fluorescent lamp in a recent A806 find. I see this is avail all over the place through the repair parts sites, but is there a size that would work from a local hardware store? Once I get the lamp taken care of and clean it up a bit, I'll post an "expressive" pict that will depict my personal view of our beloved Maytag. Thanks! Ben | ||
|
|
Post# 64630 , Reply# 1 4/28/2005 at 13:21 (6,937 days old) by Gyrafoam (Wytheville, VA) |
||
|
I got one for my 806 at Lowes, local hardware store or electrical supply would be the next places I would check. | ||
|
Post# 64638 , Reply# 2 4/28/2005 at 16:16 (6,937 days old) by coldspot66 (Plymouth, Mass) |
||
|
Take the old one with you....sometimes they are an odd size! You might want to replace the starter as well. | ||
|
Post# 64662 , Reply# 3 4/28/2005 at 22:07 (6,937 days old) by swestoyz (Cedar Falls, IA) |
||
|
The hard part is I don't have one in the recent pickup. I guess I could grab one out of the other 806, but then I'd need to go and fuss with that one, and I want to leave it alone, as it still works. Approx how long is it - and are there two pins on each side, or is it just one? Thanks for you guy's help! Ben | ||
| Post# 64663 , Reply# 4 4/28/2005 at 22:10 (6,937 days old) by bpetersxx (laf in on the banks of the Wabash River) | ||
 | ||
| Post# 64697 , Reply# 6 4/29/2005 at 02:33 (6,937 days old) by Erkjoey () | ||
|
Oh.. yes two prongs on each side! Erik | ||
|
Post# 64700 , Reply# 7 4/29/2005 at 06:39 (6,937 days old) by swestoyz (Cedar Falls, IA) |
||
|
Thanks a bunch - | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
