Thread Number: 27093
Attention Bendix fans: |
[Down to Last] |
Post# 416267   2/17/2010 at 08:48 (5,182 days old) by bajaespuma (Connecticut)   |   | |
Checkrate/Likes
 
     
|
|
Post# 416273 , Reply# 1   2/17/2010 at 09:38 (5,181 days old) by mistereric (New Jersey (Taylor Ham))   |   | |
Checkrate/Likes
 
     
|
Post# 416275 , Reply# 2   2/17/2010 at 09:42 (5,181 days old) by turquoisedude (.)   |   | |
Checkrate/Likes
 
     
|
Post# 416290 , Reply# 3   2/17/2010 at 10:34 (5,181 days old) by brianl (Saddle Brook, New Jersey)   |   | |
Checkrate/Likes
 
     
|
Post# 416322 , Reply# 4   2/17/2010 at 13:16 (5,181 days old) by volvoguy87 (Cincinnati, OH)   |   | |
Checkrate/Likes
 
     
|
Post# 416327 , Reply# 5   2/17/2010 at 13:33 (5,181 days old) by peteski50 (New York)   |   | |
Checkrate/Likes
 
     
|
Post# 417440 , Reply# 6   2/21/2010 at 22:03 (5,177 days old) by mistereric (New Jersey (Taylor Ham))   |   | |
Checkrate/Likes
 
     
Well, I don't have a place for it, and I wasn't going to pay $200. But I got it anyway. Thanks Brian! The lady came down quite a bit in price. The machine is pretty rough. Drain hose cut off. Only had 3 screws holding the back panel on. Top was pretty loose. The tub has quite a bit of play in it, and I am pretty sure the bearing is bad. Of course, the door gasket is shot to hell. Anyone have any idea how screwed I am? I am hoping to take it all apart, clean the cabinet and repaint it, take the pully and rear tub housing off and replace the bearing. I am hoping its some standard sized sealed bearing. Am I delerious? The motor turns and the timer (12 min wash) seems to operate. The little guy sounds like a cement mixer. Here are some pics: |
Post# 417441 , Reply# 7   2/21/2010 at 22:04 (5,177 days old) by mistereric (New Jersey (Taylor Ham))   |   | |
Checkrate/Likes
 
     
|
Post# 417442 , Reply# 8   2/21/2010 at 22:05 (5,177 days old) by mistereric (New Jersey (Taylor Ham))   |   | |
Checkrate/Likes
 
     
|
Post# 417443 , Reply# 9   2/21/2010 at 22:05 (5,177 days old) by mistereric (New Jersey (Taylor Ham))   |   | |
Checkrate/Likes
 
     
|
Post# 417445 , Reply# 10   2/21/2010 at 22:06 (5,177 days old) by mistereric (New Jersey (Taylor Ham))   |   | |
Checkrate/Likes
 
     
|
Post# 417446 , Reply# 11   2/21/2010 at 22:06 (5,177 days old) by mistereric (New Jersey (Taylor Ham))   |   | |
Checkrate/Likes
 
     
|
Post# 417449 , Reply# 12   2/21/2010 at 22:11 (5,177 days old) by mistereric (New Jersey (Taylor Ham))   |   | |
Checkrate/Likes
 
     
|
Post# 417451 , Reply# 13   2/21/2010 at 22:13 (5,177 days old) by gadgetgary (Bristol,CT)   |   | |
Checkrate/Likes
 
     
|
Post# 417455 , Reply# 14   2/21/2010 at 22:30 (5,177 days old) by peteski50 (New York)   |   | |
Checkrate/Likes
 
     
|
Post# 417456 , Reply# 15   2/21/2010 at 22:39 (5,177 days old) by appnut (TX)   |   | |
Checkrate/Likes
 
     
|
Post# 417477 , Reply# 16   2/22/2010 at 00:17 (5,177 days old) by jetcone (Schenectady-Home of Calrods,Monitor Tops,Toroid Transformers)   |   | |
Checkrate/Likes
 
     
|
Post# 417501 , Reply# 17   2/22/2010 at 06:58 (5,177 days old) by mistereric (New Jersey (Taylor Ham))   |   | |
Checkrate/Likes
 
     
|
Post# 417852 , Reply# 18   2/23/2010 at 10:04 (5,175 days old) by mistereric (New Jersey (Taylor Ham))   |   | |
Checkrate/Likes
 
     
|
Post# 417853 , Reply# 19   2/23/2010 at 10:11 (5,175 days old) by dblrinz ()   |   | |
Checkrate/Likes
 
     
Great Find and best of luck! |