Thread Number: 43250
Today's POD - GE dishwasher with Perma-Tuf tubs and doors.
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate automaticwasher.org if you make a purchase using any link to eBay on this page]
Post# 636071   11/3/2012 at 03:38 (4,191 days old) by PhilR (Quebec Canada)        

philr's profile picture
I think it's funny that GE bragged about it's Perma-Tuf dishwasher tub as being rust-proof and that it has none of the problems of (the competitors) porcelain-coated or stainless tubs! Of course, that's because they forgot to mention the problems of their own previous Plastisol-coated tubs!

What are the problems that are encountered with stainless tubs? I know that Waste Kings did have problems with their pumps and rusted racks but I'm still wondering what could be wrong with stainless?

The only problem I can see with stainless tubs is the higher cost of manufacturing, or the incompatibility with other non-stainless parts which (I think!) might cause galvanic corrosion.

Other ideas?





Post# 636089 , Reply# 1   11/3/2012 at 07:31 (4,191 days old) by Tomturbomatic (Beltsville, MD)        

The lower quality stainless steel tubs of some Waste King DWs sometimes rusted at the seam where the sump was joined to the upper part of the tub, I believe I remember John & Jeff telling me, but I was thinking the same WTH thing about this tub overcoming the problems of SS tubs.

17.5 gallons of hot water for the regular soil cycle! How chintzy that only the TOL 1050 had high temp cycles. WP offered that feature on more than one model, even before the late mid 70s, to say nothing of some D&M machines. It is sad that GE could not keep the upper wash arm concept and incorporate it into other models in the line even after they discontinued these models; one step forward and one step back. Everytime I went to the Woodies (Woodward & Lothrop) store at Wheaton Plaza, I used to visit this machine and wish for it to be made available in a portable. Then I got a membership card for MEMCO department stores and started visiting the WP DWs which had all of the features in a convertible portable and just a little later KA came out with the 18 series. Soon I had a wonderful appliance to call my own, even in an efficiency apt., and life began to get better.


Post# 637488 , Reply# 2   11/8/2012 at 07:38 (4,186 days old) by combo52 (50 Year Repair Tech Beltsville,Md)        
GEs First Fully Plastic Tub DWs

combo52's profile picture

This was a big step forward as GE was finally offering a DW that might last more than 10 years without rusting out. Yes it is funny that they mention that it is better than SS tubs, the only way it was likely better is it would be quieter and the white plastic tubs did not show mineral deposits as badly as SS tubs do, also the nice white tubs can make loading and unloading easier as you can see much better when you are not staring into a dark hole. Now that SS DWs have become popular we have a lot of people complain about this.

 

Now if GE had actually put a decent motor in their DWs, it took them nearly 20 more years to get rid of the noisy, crappy and grossly inefficient shaded pole motor that they introduced in 1967.


Post# 637612 , Reply# 3   11/8/2012 at 14:28 (4,186 days old) by bajaespuma (Connecticut)        
Another possible "Blond" question:

bajaespuma's profile picture

What's a "shaded pole motor"? Sounds kinda sexy.


Post# 637624 , Reply# 4   11/8/2012 at 16:19 (4,186 days old) by PhilR (Quebec Canada)        

philr's profile picture
That's the kind of motor they use in fans...

Post# 637656 , Reply# 5   11/8/2012 at 19:41 (4,186 days old) by combo52 (50 Year Repair Tech Beltsville,Md)        
Shaded Pole Motors

combo52's profile picture

Are one of the simplest and most reliable A/C motors made, they are also one of the most inefficient motors in terms of power output when you consider how much power they use. I think that GE was the only Major Appliance manufacturer that ever used one in a major appliance as the main motor.


Post# 638034 , Reply# 6   11/10/2012 at 11:00 (4,184 days old) by lotsosudz (Sacramento, CA)        

lotsosudz's profile picture
Shaded pole motors, were motors that lay in hammocks, under palm trees. Of course they had good looking native boys fanning them with palm fronds,while wearing loin cloths. Whats wrong with you boy's. LOL
Hugs,
David


Post# 638062 , Reply# 7   11/10/2012 at 13:37 (4,184 days old) by TwinTubber (Toronto)        
Did anyone save that pic?

If so I'd love a copy of it.
I missed it that day and would love to see it.
I remember when GE launched the Perma-Tuf interior.
Never was a fan of it actually.



Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy