Thread Number: 4536
Copper Maytags Rescued |
[Down to Last] |
Post# 102569   1/8/2006 at 22:15 (6,682 days old) by cadman (Cedar Falls, IA)   |   | |
Checkrate/Likes
 
     
Hey Guys, Just brought 'em home, a minty set of '69 coppertones! This gets me closer on my quest to collect all the Maytag colors. The controls have seen some use, but the cabinets were mint. Unfortunately we put a 1" scratch on the dryer face bringing it down the steep basement stairs so I guess the search continues for perfection : ( The dryer is a 606 and the washer is a CA206 so I'm considering upgrading the panels at some point, unless a nice 806 set follows me home ; ) The painted silver trim with blue on both are a tad cheezy but maybe they'll grow on me! - Cory |
|
Post# 102572 , Reply# 1   1/8/2006 at 22:41 (6,682 days old) by appliguy (Oakton Va.)   |   | |
Checkrate/Likes
 
     
|
Post# 102588 , Reply# 2   1/9/2006 at 05:07 (6,682 days old) by drmitch ()   |   | |
Checkrate/Likes
 
     
Another cool find, Cory! Is there a small light above the dials? I see something there. :) |
Post# 102604 , Reply# 3   1/9/2006 at 07:58 (6,682 days old) by geoffdelp (SAUK RAPIDS)   |   | |
Checkrate/Likes
 
     
Cory ... those are very nice!!! Hopefully, you'll be able to put them to good use. What other colors do you have? |
Post# 102606 , Reply# 4   1/9/2006 at 08:10 (6,682 days old) by toggleswitch (New York City, NY)   |   | |
Checkrate/Likes
 
     
-Is there a small light above the dials? IIRC on the A206 (which my mother had) the lens is there for a pilot-light/indicator light, but no light-source behind it! The models that DID have indicatorss would keep the light illuminated while running and as a "CLEAN" indicator until the center of the timer dial (the knob) was pushed in! |
Post# 102607 , Reply# 5   1/9/2006 at 08:12 (6,682 days old) by toggleswitch (New York City, NY)   |   | |
Checkrate/Likes
 
     
|
Post# 102611 , Reply# 6   1/9/2006 at 08:31 (6,682 days old) by mayken4now (Panama City, Florida)   |   | |
Checkrate/Likes
 
     
|
Post# 102617 , Reply# 7   1/9/2006 at 09:51 (6,682 days old) by unimatic1140 (Minneapolis)   |   | |
Checkrate/Likes
 
     
|
Post# 102689 , Reply# 8   1/9/2006 at 15:08 (6,681 days old) by pulsator (Saint Joseph, MI)   |   | |
Checkrate/Likes
 
     
|
Post# 102691 , Reply# 9   1/9/2006 at 15:41 (6,681 days old) by gregm ()   |   | |
Checkrate/Likes
 
     
veeeeeeeeeeeeeeeerrrryyyyyy nice :) |
Post# 102692 , Reply# 10   1/9/2006 at 15:48 (6,681 days old) by swestoyz (Cedar Falls, IA)   |   | |
Checkrate/Likes
 
     
|
Post# 102761 , Reply# 11   1/9/2006 at 22:10 (6,681 days old) by cadman (Cedar Falls, IA)   |   | |
Checkrate/Likes
 
     
|
Post# 102800 , Reply# 12   1/10/2006 at 06:06 (6,681 days old) by chestermikeuk (Rainhill *Home of the RailwayTrials* Merseyside,UK)   |   | |
Checkrate/Likes
 
     
|
Post# 103049 , Reply# 13   1/11/2006 at 18:05 (6,679 days old) by bpetersxx (laf in on the banks of the Wabash River)   |   | |
Checkrate/Likes
 
     
|
Post# 103097 , Reply# 14   1/11/2006 at 21:13 (6,679 days old) by cadman (Cedar Falls, IA)   |   | |
Checkrate/Likes
 
     
Thanks for the kudos guys, it's appreciated! Yes, this one has the dark blue tub and as I found out, the pilot light is indeed faux : ) Patrick, thanks for the kind words on my website, I still need to add a decent washer page but have been getting some positive feedback on the Radarange listing...just not enough time in the day! Cory |