Thread Number: 49297
Speed Queen Washer Lid Switches |
[Down to Last] |
Post# 713371   11/5/2013 at 14:06 (3,824 days old) by chetlaham (United States)   |   | |
Checkrate/Likes
 
     
Do speed queen washers have imbalance protection in their lid switches?
I decided on ordering new Speed Queen as my daily driver since I am very impressed with performance of them. I just found that out after I picked up an AWN413 that was on heavy discount because of shipping damage (one side is scratched up and the front has a big dent) My plan was to tinker with it just for kicks, but it turned out they are just as good if not even better than what you guys say about them :D :D
Anyway, Im thinking about bypassing the switch with a zip tie in the back. However my concern is if these have imbalance protection I don't want to inadvertently over ride it.
Thanks! |
|
Post# 713373 , Reply# 1   11/5/2013 at 14:10 (3,824 days old) by henene4 (Heidenheim a.d. Brenz (Germany))   |   | |
Checkrate/Likes
 
     
The toploaders do not have any kind of imbalance switch as far as I know... |
Post# 713375 , Reply# 2   11/5/2013 at 15:09 (3,824 days old) by nmassman44 (Brooksville Florida)   |   | |
Checkrate/Likes
 
     
|
Post# 713403 , Reply# 3   11/5/2013 at 16:40 (3,824 days old) by washman (o)   |   | |
Checkrate/Likes
 
     
In looking at the parts guide, I did not see anything about an unbalance switch. From my own personal use, I have not had any unbalance issues that have caused issues. |
Post# 713448 , Reply# 4   11/5/2013 at 21:58 (3,823 days old) by chetlaham (United States)   |   | |
Checkrate/Likes
 
     
|