Thread Number: 68683  /  Tag: Modern Automatic Washers
ge badge amana
[Down to Last]'s exclusive eBay Watch:
scroll >>> for more items
Post# 914684   1/8/2017 at 18:59 (528 days old) by queeny77 (BERWYN, ILLINOIS)        

queeny77's profile picture
never saw this before

  Photos...       <              >      Photo 1 of 2         View Full Size

Post# 914686 , Reply# 1   1/8/2017 at 19:20 (528 days old) by whirlykenmore78 (Prior Lake MN (GMT-0700 CDT.))        

whirlykenmore78's profile picture

I've seen the same machine badged as a Maytag.  An inferior version of the Alliance SQ/Hubesch TL.


Post# 914845 , Reply# 2   1/9/2017 at 21:58 (527 days old) by chetlaham (United States)        
Some more pics

chetlaham's profile picture
Not sure what the story is, but what I wish post filter flo GE's looked like.

  Photos...       <              >      Photo 1 of 8         View Full Size
Post# 914904 , Reply# 3   1/10/2017 at 07:22 (526 days old) by neptunebob (Pittsburgh, PA)        
Story might be..

neptunebob's profile picture
At the time these were made there was a strike or threat of one at the GE plant and so GE had Amana make some of these washers.

Post# 914921 , Reply# 4   1/10/2017 at 08:58 (526 days old) by vacerator (Macomb, Michigan)        
Aren't strikes

illegal these days, or many want them to be.
A man in Dongguan China a few years back tried organizing against govt. control and he was found crushed to death between a gravel truck and other equipment and gravel.
Seems to be a polarization between the haves and have not's, or have less.
The Teamsters used some violence as leverage back in the early days.
A local sewer line collapse near us recently is said by a few to be the fault of lazy union workers.
That line was worked on two years ago and cleared of any danger, but just after those workers pensions were reduced and taxed. One might say, one gets what one pays for. Inferior Speed Queen/Amana knock off made for GE? Speed Queen is union.
Two 90 degree angles make 180 degrees. Two 180's make 360, a full circle.
Are few masters because many are slaves, or are many slaves because few are masters? Two way street.

Post# 914958 , Reply# 5   1/10/2017 at 12:51 (526 days old) by Yogitunes (New Jersey)        

yogitunes's profile picture
the gray splash shield tells you its a Raytheon built machine.....way before Alliance took over....these models were prone to the seal failures...

these were built under Amana, GE, Speed Queen names during that time....

Alliance didn't build for anyone else, just Speed Queen or Huebsch only....

GE stretched out to a number of other manufacturers, even seen their names on Fridgemore FLers...

Post# 915016 , Reply# 6   1/10/2017 at 20:42 (526 days old) by chetlaham (United States)        

chetlaham's profile picture
@queeny77, do you have the model/serial to that machine?

Post# 915043 , Reply# 7   1/11/2017 at 00:38 (525 days old) by neptunebob (Pittsburgh, PA)        
Actaully, it may have just been a threat,

neptunebob's profile picture
I don't know if there actually was a strike, but there may have been the threat of one and GE did not want to be without product in case there was. I did see these at HD a few years ago, I don't think they were made for long.

Post# 915057 , Reply# 8   1/11/2017 at 05:20 (525 days old) by brucelucenta ()        

So what year did Alliance take over?

Post# 915078 , Reply# 9   1/11/2017 at 08:28 (525 days old) by gansky1 (Omaha, The Home of the TV Dinner!)        

gansky1's profile picture
These were also sold under the Maytag name, most ended up in the recycling stream within a few years. I brought one home from the discard pile behind Lowes one night and took it straight back the next morning.

Was looking behind Lowes one night and a guy pulled up ready to snatch a pair of these and asked if I thought they were still good. Hahaha. Nope, don't waste your time.

Post# 915590 , Reply# 10   1/14/2017 at 05:44 (522 days old) by angus (Fairfield, CT.)        

Even with the gray splashguard, I am not sure these were Raytheon built machines. I don't think these were on the market until around 2001 - 2002 or so and by that time Goodman already owned Amana. I could be wrong about that but I could swear that I saw the GE badged/Maytag badged models at a the HD around the time I was having main seal issues with my 18 month old Goodman built Amana. Either way those machines were losers and putting them on the market in the first place was just plain wrong.

Post# 915591 , Reply# 11   1/14/2017 at 05:59 (522 days old) by alr2903 (TN)        

Our Amana had the same seal failure @ 7 years in 2005.  1998 must of been the year of purchase, it had the grey tub guard as pictured.  I remember the front panel was 1 piece not the 2 piece front as shown in reply #2.

Post# 915647 , Reply# 12   1/14/2017 at 13:08 (522 days old) by rp2813 (The Big Blue Bubble)        

rp2813's profile picture

Yeah, that looks like the belt-eating Raytheon Amana we bought in 1996. 


One thing about the Amana compared to this GE is that the controls were far better designed.  That GE panel is a hot mess.

Post# 935537 , Reply# 13   4/30/2017 at 18:24 (416 days old) by appliancedude16 (Sunnyvale,California, U.S.A)        
Model number?

What is the model number of this Amana/Speed Queen rebadged GE(General Electric)?

Forum Index:       Other Forums:                      

Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In

New Members
Click Here To Sign Up.

Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy