Thread Number: 76527
/ Tag: Twin-Tub Washers
Galamatic Twin Tub |
[Down to Last] |
Post# 1003830   8/16/2018 at 06:23 (2,080 days old) by keymatic (London / UK)   |   | |
Checkrate/Likes
 
     
Morning Guys,
I received a nice "Galamatic" brochure this morning and was curious to know if the machine had a discharge water arm on the spinner side like the original Supermatic ? The machine looks like it could have one built in to the rear consul, but there is no mention of it in the brochure. Regards Keith
View Full Size
|
|
Post# 1003833 , Reply# 1   8/16/2018 at 08:19 (2,079 days old) by vacbear58 (Sutton In Ashfield, East Midlands, UK)   |   | |
Checkrate/Likes
 
     
Keith
Here is an advertisment for it It is quite a curious hydrid between the 1400 and the 1420, with some bits of both in it - as far as I am aware this model was never sold in the UK. The ad is dated 1965, I thought the 1420 would have been introduced by them or very shortly after. Sent you an email to the address in your profile on here Al |
Post# 1003878 , Reply# 3   8/16/2018 at 16:27 (2,079 days old) by vacerator (Macomb, Michigan)   |   | |
Checkrate/Likes
 
     
only betta with a long A pronunciation. There was a shauk attack yesterday. I could have sworn the older guy on the news this morning was an Aussie. It was very early. I had only just awoke. It was on Cape Cod near Bauston. Anyone ever go to bear week in Provincetown Mass.? |
Post# 1003921 , Reply# 4   8/17/2018 at 06:14 (2,079 days old) by jamiel (Detroit, Michigan and Palm Springs, CA)   |   | |
Checkrate/Likes
 
     
|
Post# 1003934 , Reply# 5   8/17/2018 at 09:52 (2,078 days old) by keymatic (London / UK)   |   | |
Checkrate/Likes
 
     
Matthew,
It does look like there could be an arm which is lifted from the right-hand side near the spinner bit like the set up on the original HP 1400. Are there any Oz guys on here who have one in their collection or have seen/ used one ? Regards Keith
View Full Size
|
Post# 1004756 , Reply# 6   8/25/2018 at 04:35 (2,071 days old) by Keymatic (London / UK)   |   | |
Checkrate/Likes
 
     
One for the OZ guys....
Not sure anyone can help but Hotpoint had a large wringer washer here in the UK for many years (aprox 40 yrs) called the Empress, however the other day i am sure a saw an advert for the same machine on Ebay Australia but the model was called an Heiress ? Can anyone confirm this or am i going mad !! Lol Cheers Keith |