Thread Number: 30886
Maytag Dial In Poor Condition |
[Down to Last] |
Post# 466405   9/29/2010 at 19:05 (4,957 days old) by beekeyknee (Columbia, MO)   |   | |
Checkrate/Likes
 
     
|
|
Post# 466406 , Reply# 1   9/29/2010 at 19:09 (4,957 days old) by beekeyknee (Columbia, MO)   |   | |
Checkrate/Likes
 
     
|
Post# 466408 , Reply# 2   9/29/2010 at 19:17 (4,957 days old) by beekeyknee (Columbia, MO)   |   | |
Checkrate/Likes
 
     
|
Post# 466560 , Reply# 3   9/30/2010 at 14:54 (4,956 days old) by goatfarmer (South Bend, home of Champions)   |   | |
Checkrate/Likes
 
     
|
Post# 466564 , Reply# 4   9/30/2010 at 15:27 (4,956 days old) by macboy91si (Frankfort, KY)   |   | |
Checkrate/Likes
 
     
|
Post# 466644 , Reply# 5   10/1/2010 at 06:04 (4,955 days old) by beekeyknee (Columbia, MO)   |   | |
Checkrate/Likes
 
     
Kenny,
The first picture is a dial on my 806. That's the one I'd like to replace. The second picture is just an example of the condition I'd like my 806 dial to be in (or close to it). I ordered a dial from a place in Rockford, Ill. She asked for a picture of the dial and then sent me a dial like the one I already had - the one I'd picked up at a local store here in town. At least she had a picture to go by. I was guessing from memory when I picked up the local one. I sent her back and email with pictures of the mistake she'd made and she said she had a dial that was close to it but not and exact match. She sent it to me. It has the "Soak" cycle and a blank spot where the "Pre-wash" cycle is supposed to be, if it's going to match my machine. So now I have 4 dials. The bad one on my machine, two like the second picture I posted and the one that has the "Soak" cycle, but no "Pre-wash" cycle. No picture of it, but you probably know which dial I'm talking about. I'd be willing to trade and/or pay to get a decent dial. If you can help or know of someone that could, I'd be extremely grateful. My rebuild is on post 30451, if you haven't seen it. Thanks. Brian. |
Post# 466721 , Reply# 6   10/1/2010 at 15:57 (4,955 days old) by goatfarmer (South Bend, home of Champions)   |   | |
Checkrate/Likes
 
     
|
Post# 466751 , Reply# 7   10/1/2010 at 17:57 (4,955 days old) by qsd-dan (West)   |   | |
Checkrate/Likes
 
     
If you don't mind having the older acrylic timer dial, there's a couple of them on currently on ebay
CLICK HERE TO GO TO qsd-dan's LINK on eBay |
Post# 466779 , Reply# 8   10/1/2010 at 19:43 (4,955 days old) by beekeyknee (Columbia, MO)   |   | |
Checkrate/Likes
 
     
|
Post# 469852 , Reply# 9   10/17/2010 at 07:28 (4,939 days old) by beekeyknee (Columbia, MO)   |   | |
Checkrate/Likes
 
     
Since no one seemed to have a replacement dial for my machine, a friend and I made a mirror image transparency from a picture, combined with Adobe Photoshop and a CD label maker program. Then we placed it on a flash drive and duplicated it to make six transparencies on an 8 x 11 sheet.
I placed a scribe mark on the side of the dials where the permanent press "Off" mark was. Then with a bench grinder, polishing wheels, and some rouge, I buffed up the old dials to a brilliant shine. Next, I masked off the areas I didn't want photo mount adhesive on, carefully cut out the inter and outer circles of the transparency with a radial cutter, and placed the transparency precisely where it should be on the dial to match the cycles. We also made a two color version of avocado and a lighter green to coordinate with the color of my washer, in case I ever want to give it a custom look. Many thanks to my friend for helping me with the computer graphics. |
Post# 469853 , Reply# 10   10/17/2010 at 07:29 (4,939 days old) by beekeyknee (Columbia, MO)   |   | |
Checkrate/Likes
 
     
|
Post# 469855 , Reply# 11   10/17/2010 at 07:37 (4,939 days old) by beekeyknee (Columbia, MO)   |   | |
Checkrate/Likes
 
     
|
Post# 469857 , Reply# 12   10/17/2010 at 07:49 (4,939 days old) by beekeyknee (Columbia, MO)   |   | |
Checkrate/Likes
 
     
|
Post# 469858 , Reply# 13   10/17/2010 at 07:56 (4,939 days old) by cphifer5115 (Jackson, TN)   |   | |
Checkrate/Likes
 
     
|
Post# 469885 , Reply# 14   10/17/2010 at 10:56 (4,939 days old) by mrb627 (Buford, GA)   |   | |
Checkrate/Likes
 
     
|
Post# 469934 , Reply# 15   10/17/2010 at 14:39 (4,939 days old) by PeterH770 (Marietta, GA)   |   | |
Checkrate/Likes
 
     
|
Post# 469935 , Reply# 16   10/17/2010 at 14:39 (4,939 days old) by goatfarmer (South Bend, home of Champions)   |   | |
Checkrate/Likes
 
     
|
Post# 470059 , Reply# 17   10/18/2010 at 07:41 (4,938 days old) by beekeyknee (Columbia, MO)   |   | |
Checkrate/Likes
 
     
I am interested in the dryer. If you could tell me about the dryer, I would appreciate it. Any information would be nice. Does it have the gold paint where the buttons are, the over all condition, have you ran it, and so forth. If you'd like to email me, that would be OK with me. Let me know. Thanks much.
Brian |
Post# 470996 , Reply# 18   10/23/2010 at 14:30 (4,933 days old) by 18millstreet ()   |   | |
Checkrate/Likes
 
     
Hello, Do you still need this dial? I have one in good condition. Please e-mail me at: wclute14067@yahoo.com to confirm shipping details,thanks,Walt |
Post# 471001 , Reply# 19   10/23/2010 at 14:58 (4,933 days old) by Gadgetgary (Bristol,CT)   |   | |
Checkrate/Likes
 
     
|
Post# 471015 , Reply# 20   10/23/2010 at 18:08 (4,933 days old) by qsd-dan (West)   |   | |
Checkrate/Likes
 
     
|
Post# 471398 , Reply# 21   10/25/2010 at 18:30 (4,931 days old) by beekeyknee (Columbia, MO)   |   | |
Checkrate/Likes
 
     
|
Post# 471410 , Reply# 22   10/25/2010 at 20:29 (4,931 days old) by lebron (Minnesota)   |   | |
Checkrate/Likes
 
     
|