Thread Number: 33011
Frigidaire GMini w3-224 & D-24 |
[Down to Last] |
|
Post# 497083 , Reply# 1   2/17/2011 at 09:16 (4,816 days old) by PeterH770 (Marietta, GA)   |   | |
Checkrate/Likes
 
     
|
Post# 497090 , Reply# 2   2/17/2011 at 10:07 (4,816 days old) by mistereric (New Jersey (Taylor Ham))   |   | |
Checkrate/Likes
 
     
|
Post# 497100 , Reply# 3   2/17/2011 at 10:41 (4,816 days old) by mrb627 (Buford, GA)   |   | |
Checkrate/Likes
 
     
|
Post# 497103 , Reply# 4   2/17/2011 at 10:51 (4,816 days old) by swestoyz (Cedar Falls, IA)   |   | |
Checkrate/Likes
 
     
|
Post# 497106 , Reply# 5   2/17/2011 at 11:05 (4,816 days old) by mickeyd (Hamburg NY)   |   | |
Checkrate/Likes
 
     
This must be quite a machine so have such illustrious club members interested. Unfamiliar, is this an Agi tub? is there a thread somewhere about this gem? I hope one of you gets it. Yes, Saranac lake is located about mid-state; easy enough to check. I just looked. It's in the Adirondacks right next to Lake Placid, a couple hours up from Albany. |
Post# 497108 , Reply# 6   2/17/2011 at 11:13 (4,816 days old) by PeterH770 (Marietta, GA)   |   | |
Checkrate/Likes
 
     
|
Post# 497109 , Reply# 7   2/17/2011 at 11:18 (4,816 days old) by mickeyd (Hamburg NY)   |   | |
Checkrate/Likes
 
     
|
Post# 497237 , Reply# 8   2/17/2011 at 20:07 (4,816 days old) by appnut (TX)   |   | |
Checkrate/Likes
 
     
|
Post# 497258 , Reply# 9   2/17/2011 at 21:23 (4,816 days old) by mistereric (New Jersey (Taylor Ham))   |   | |
Checkrate/Likes
 
     
Looking around on here, I found what I needed. Yes, an interesting little machine - not portable but smaller, 24", so I'm still interested.
CLICK HERE TO GO TO mistereric's LINK This post was last edited 02/17/2011 at 21:39 |
Post# 497322 , Reply# 10   2/18/2011 at 00:54 (4,816 days old) by DaveAMKrayoGuy (Oak Park, MI)   |   | |
Checkrate/Likes
 
     
Well, thanks to the links that go to the entire Frigidaire washer brochure!
I had no idea how different the Frigidaire Reg. Cap. washers are, compared to the 1-18; I really thought that they'd be a bit more similar... (Rear-opening & a polyproplyne lid, not-to-mention the color selection, different from the larger machines...!) Thanks again! -- Dave (& noting how Charles Klamkin disliked the Frigidaire up & down pulsator design; clothes would be tangled & twisted like ropes, but to me that happens w/ conventional back 'n' forth agitation!) |
Post# 497371 , Reply# 11   2/18/2011 at 09:13 (4,815 days old) by sarah (Show Low, AZ)   |   | |
Checkrate/Likes
 
     
I haven't been able to find out much more about these machines, except for what's on this forum. Yes, I am in upstate NY, about a 2 1/2 hour drive from Albany. Any ideas of what these are worth? |
Post# 497837 , Reply# 12   2/20/2011 at 01:50 (4,814 days old) by PhilR (Quebec Canada)   |   | |
Checkrate/Likes
 
     
|