|
Thread Number: 44454
2006 Ge dryer top bearing replacement |
[Down to Last] |  |
| Post# 652884 1/13/2013 at 05:22 (4,120 days old) by doug (West Virgina) | ||
My question is when I replace the top bearing on my recently bought 2006 ge dryer. Will all I need be just the two drum glides to put onto the top bearing piece or will I also need felt? I'm thinking I just need the two drum glides, but It seems to me that it would need felt also but the 2 glides are the only thing it says I'll need. Jus thought I'd get some of you guys opinions first if I could!
| ||
|
Post# 652885 , Reply# 1 1/13/2013 at 05:31 (4,120 days old) by eronie  (Flushing Michigan) |
||
|
Felt The felt should still be okay if not replace it. | ||
|
Post# 653100 , Reply# 2 1/13/2013 at 16:07 (4,120 days old) by goatfarmer (South Bend, home of Champions) |
||
 | ||
| Post# 653171 , Reply# 3 1/13/2013 at 19:32 (4,120 days old) by doug (West Virgina) | ||
|
Placement of felt | ||
| Post# 653506 , Reply# 4 1/15/2013 at 11:39 (4,118 days old) by fido () | ||
|
The top ones don't usually wear out anyway. I suppose they might if the motor was at the top. | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
