Thread Number: 46584
The first look at the 1957 GE Dryer |
[Down to Last] |
Post# 679109   5/13/2013 at 11:27 (4,000 days old) by turquoisedude (.)   |   | |
Checkrate/Likes
 
     
No sooner had I found the 1957 GE Filter-Flo washer than I heard from a couple of members about this dryer!! I like to have matched sets of laundry equipment, so I was thrilled to hear about this. With the help of Jon(jetcone), this dryer made it's way from John's to Boston, where Phil and I picked it up in January. The only hiccup was that a: I had no space in the garage in Ogden and b: Hubby didn't know about it... Fortunately, my neighbour, Cyndi, let me store it in her garage; last weekend, I snuck it into the garage while hubby was too busy in the gardens to notice!
So, first thing I had to do was connect it to the 120 volt supply to see what would happen... |
|
Post# 679110 , Reply# 1   5/13/2013 at 11:28 (4,000 days old) by turquoisedude (.)   |   | |
Checkrate/Likes
 
     
|
Post# 679111 , Reply# 2   5/13/2013 at 11:29 (4,000 days old) by turquoisedude (.)   |   | |
Checkrate/Likes
 
     
|
Post# 679112 , Reply# 3   5/13/2013 at 11:31 (4,000 days old) by turquoisedude (.)   |   | |
Checkrate/Likes
 
     
|
Post# 679113 , Reply# 4   5/13/2013 at 11:36 (4,000 days old) by turquoisedude (.)   |   | |
Checkrate/Likes
 
     
So, Hubby (and probably the two other neighbours in our valley) heard the rumble... He thought this was the '63 that is now in service in the Ogden Laundry... BUSTED!
Well, he went back to gardening and I went back to testing. So, it would seem that I have a flat spot on a drum roller. I didn't get to take the drum out, but I do believe that this model would be a friction-drive and if so, I happen to have a NIB drive roller for the 1958 model and I hope this may help. I'll know more when I get the drum out for a better look. The bad news is that the timer motor is dead. I'll be on the hunt for a suitable replacement! |
Post# 679115 , Reply# 5   5/13/2013 at 11:40 (4,000 days old) by turquoisedude (.)   |   | |
Checkrate/Likes
 
     
Now this is something I really don't understand... On the control panel, there was a rectangular pink plastic part labelled 'Air Freshener' with a scale below it from OFF to HIGH.
Well, I pulled it out and it seems to be a tray. I'll guess that one was supposed to put some kind of a fabric softener/freshener product in this tray. The pointer (you can barely see it inside the tray) had broken off at some point, but fortunately got trapped in the control panel. What luck! I know the 1958 version of the Clothes Conditioner had a small aerosol bottle that was used for the Air Freshener - what would have been used on the 1957 model?? |
Post# 679116 , Reply# 6   5/13/2013 at 11:43 (4,000 days old) by turquoisedude (.)   |   | |
Checkrate/Likes
 
     
Note the black tubing at the right of the console - I guess this would draw the freshener into the drum. Very interesting system... I'm hoping some service information for this beastie may just find its way into Automatic Ephemera... Was that too subtle?? LOL
So, my project list for 2013 is growing... |
Post# 679131 , Reply# 8   5/13/2013 at 14:00 (4,000 days old) by pulltostart (Mobile, AL)   |   | |
Checkrate/Likes
 
     
|
Post# 679141 , Reply# 9   5/13/2013 at 15:08 (4,000 days old) by DigAPony ()   |   | |
Checkrate/Likes
 
     
That is probably a porcelain enamel finish on the top cover, not paint. Very durable if not abused. |
Post# 679244 , Reply# 10   5/14/2013 at 03:46 (3,999 days old) by Jetcone (Schenectady-Home of Calrods,Monitor Tops,Toroid Transformers)   |   | |
Checkrate/Likes
 
     
It sounds like its minting coinage!!
Yes flat spot for sure on those hard rubber rollers. Good thing you have parts in stock! Now get back to the Dominion!!
Welcome Shirley from Fife! Nice country Scotland, although I am biased ---as a Dunlop should be! Perhaps you'll put pictures up of your collection??
|
Post# 679265 , Reply# 11   5/14/2013 at 07:09 (3,999 days old) by combo52 (50 Year Repair Tech Beltsville,Md)   |   | |
Checkrate/Likes
 
     
|
Post# 679266 , Reply# 12   5/14/2013 at 07:23 (3,999 days old) by turquoisedude (.)   |   | |
Checkrate/Likes
 
     
|