Thread Number: 48395
"Just a few blemishes..."
[Down to Last]'s exclusive eBay Watch:
scroll >>> for more items
Post# 701263   9/4/2013 at 23:30 (3,489 days old) by redcarpetdrew (Fairfield, CA)        

redcarpetdrew's profile picture

Post# 701264 , Reply# 1   9/4/2013 at 23:33 (3,489 days old) by gansky1 (Omaha, The Home of the TV Dinner!)        

gansky1's profile picture
If there is no screen door latch holding the door closed, it's mint!

Post# 701289 , Reply# 2   9/5/2013 at 00:15 (3,489 days old) by DaveAmKrayoGuy (Oak Park, MI)        

daveamkrayoguy's profile picture
So what fell on it?

I think if it doesn't have a BUNGEE STRAP keeping the door closed, then it's Mint!

-- Dave

Post# 701305 , Reply# 3   9/5/2013 at 02:41 (3,489 days old) by tolivac (greenville nc)        

Would it be considered mint if the dryer fell off the truck?

Post# 701343 , Reply# 4   9/5/2013 at 08:29 (3,489 days old) by joefuss1984 (Little Rock, AR)        

joefuss1984's profile picture
Poor little Kenmore

Post# 701355 , Reply# 5   9/5/2013 at 09:54 (3,489 days old) by redcarpetdrew (Fairfield, CA)        
Fell off the truck...

redcarpetdrew's profile picture
You're killing me. Why I almost dropped my iPad after reading that, I'll never know. LOL.

For posterity, the text from stated add:

I have a gas dryer my sister in law gave m , but i need an electic dryer. I am willing to trade or just cash . Must b able to pick up . Works great , just a few blimishes cosmeticly. Plz txt or call Tabetha 225#2922!


Post# 701363 , Reply# 6   9/5/2013 at 10:57 (3,489 days old) by danemodsandy (The Bramford, Apt. 7-E)        

danemodsandy's profile picture
....That's the most interesting panel styling I've seen on a Kenmore in the last thirty years.

Post# 701366 , Reply# 7   9/5/2013 at 11:33 (3,489 days old) by akronman (Akron/Cleveland Ohio)        

akronman's profile picture

It's Kenmore's little known "GullWing" design, you can add the feature to any machine you want.

Post# 701373 , Reply# 8   9/5/2013 at 13:09 (3,489 days old) by CleanteamofNY ((Monroe, New York)        

cleanteamofny's profile picture
Daisy husband Onslow learned how to do laundry and we know how he turn on the TV!!!

Post# 701400 , Reply# 9   9/5/2013 at 15:55 (3,489 days old) by goatfarmer (South Bend, home of Champions)        

goatfarmer's profile picture

Methinks the price is about $70.00 too much....

Post# 701406 , Reply# 10   9/5/2013 at 16:49 (3,488 days old) by whirlykenmore78 (Prior Lake MN (GMT-0600-CST.))        
A few belemishes

whirlykenmore78's profile picture



Oh well still beats a MT "ducks and runs"

Post# 701429 , Reply# 11   9/5/2013 at 18:53 (3,488 days old) by redcarpetdrew (Fairfield, CA)        
Still beats a MT...

redcarpetdrew's profile picture
Nick, it's a good thing that Robert installed language filters on the site...

What you SHOULD have said was "Oh well, it was beaten BY a Maytag!" LOL!


Post# 701434 , Reply# 12   9/5/2013 at 19:14 (3,488 days old) by combo52 (50 Year Repair Tech Beltsville,Md)        
Still Beats a Maytag

combo52's profile picture

 Nick is absolutely correct, even this dented KM dryer will out perform and outlast any REAL MT dryer EVER built.


Sorry it may not be pretty, but that is the truth of the matter.

Post# 701440 , Reply# 13   9/5/2013 at 19:32 (3,488 days old) by redcarpetdrew (Fairfield, CA)        
I wondered if that would get your attention... LOL!

redcarpetdrew's profile picture
It's not pretty but it's the truth...

I guess that would explain why I replace more support rollers, idler pulleys, elements and motors on the Kenmore/Whirlpool dryers than the Dependable Care Maytag dryers. Also, that would explain why the Maytag dryer tops last longer and look nicer than the painted KM/WP dryer tops that scratch and rust if you look at them wrong. Lets not even get into durability of the drum surfaces. All front service vs. KM/WP pulling it out (usually in a phone booth sized room) to access stuff on the back is also thought provoking

I also have an issue with a system that has the heat both entering and exiting thru the back panel thru openings not too far apart where the Maytag has the heated air enter thru the back panel, THRU the clothing and exiting out of the front. A system that Maytag has kept in one form or another since forever. My service call rate on laundry has actually INCREASED since Whirlpool took over the establishment and started putting the Maytag name on Whirlpool laundry.

No, it's not pretty at all.


Forum Index:       Other Forums:                      

Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In

New Members
Click Here To Sign Up.

Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy