Thread Number: 53542
Whirlpool Calypso Washer and Dryer Set - $250 (Arcanum ) |
[Down to Last] |
Post# 759010   5/22/2014 at 22:14 (3,626 days old) by ovrphil (N.Atlanta / Georgia )   |   | |
Checkrate/Likes
 
     
|
|
Post# 759014 , Reply# 1   5/22/2014 at 22:27 (3,626 days old) by DADoES (TX, U.S. of A.)   |   | |
Checkrate/Likes
 
     
Long Drain “Ld” flashes if it takes longer than 5 minutes to pump out water to a point where the operating pressure switch resets. Press STOP/CANCEL to clear the display. Average Current Limit or Instantaneous Current Limit If a status signal comes back from the motor controller that a current limit has been breached, the unit will return to standby mode and display either “CA” for average current limit trip or “CI” for instantaneous current limit trip. "CA" Average current trip occurs if there is a 2 second average of current draw greater than 5.55 Amps at the motor windings. "CI" Instantaneous current trip occurs if there is a spike of 26 Amps instantly at the motor windings. This may signify problems with the drive motor, thermal protector, or motor controller. Overloading the unit may cause this problem. Press STOP/CANCEL to clear the display. |
Post# 759018 , Reply# 2   5/22/2014 at 22:52 (3,626 days old) by ultramatic (New York City)   |   | |
Checkrate/Likes
 
     
|
Post# 759022 , Reply# 3   5/22/2014 at 23:01 (3,626 days old) by ovrphil (N.Atlanta / Georgia )   |   | |
Checkrate/Likes
 
     
I am trying to update that - thanks Louie . The problem is the edit feature isn't populating the box for photos with the original postings so I can delete them. When I delete all the photos, and add more, the update and preview doesn't function at all. I don't know if it's me again or the software. I'll repost it.
|
Post# 759024 , Reply# 4   5/22/2014 at 23:05 (3,626 days old) by ovrphil (N.Atlanta / Georgia )   |   | |
Checkrate/Likes
 
     
|
Post# 759028 , Reply# 5   5/22/2014 at 23:44 (3,626 days old) by ultramatic (New York City)   |   | |
Checkrate/Likes
 
     
|