Thread Number: 54413
Appliance/Elevtronic status symbols by the decade
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate automaticwasher.org if you make a purchase using any link to eBay on this page]
Post# 767901   7/4/2014 at 11:34 (3,583 days old) by verizonbear (Glen Burnie )        

verizonbear's profile picture
A friend of mine is getting his MBA and is specializing in marketing. On the MARC train to DC we had a discussion and made a list of " Appliance\Electronic Status Symbols " that represented entry into the upper middle class and became mainstream during that decade. What would you add this list?

1950s : Automatic Washers, Dryers, TV stereo consoles Refrigerator with seperate freezer compartment.

1960s: Dishwashers, Washer Dryer Combos, Frost Free Refrigerators with ice maker, self cleaning ovens, reel to reel audio tape recorders, garbage disposals, color TV, built in wall ovens and cooktops

1970s: Microwave Ovens, Side by Side Refrigerator with ice/water in door, seperate stereo components, 8 track tape players. trash compactors, portable washers and dryers,25 inch console tvs,



1980s: CD players, Microwave/Convection combos, Over the range Microwave Hood, Down draft vented cooktops. Stacked Unitized washer/dryer, cassette tape players

1990s: Ceramic Cooktops, home theater systems, laser disc players, camcorders, white on white appiances

2000s: Dual Fuel Ranges, stainless steel appliances, rebranding of front load washers, dishwashers with stainless steel interior, electronic controls, Dvd players, high depth tv, rebranding of bottom freezer refrigerators, Drawer Diswashers, cooktops with grill, ranges with convection ovens. induction cooktops, surround sound home theater

2010- h2014, French door refrigerators, wine coolers, lcd TVs, sound bars, internet connectivity,





Post# 768135 , Reply# 1   7/5/2014 at 08:01 (3,582 days old) by jakeseacrest (Massachusetts)        

jakeseacrest's profile picture
Kitchen Aid Mixers for the 70s and Cuisinart Food Processors would probably be in the 80s.

Post# 768139 , Reply# 2   7/5/2014 at 08:23 (3,582 days old) by kenwashesmonday (Carlstadt, NJ)        

This post has been removed by the member who posted it.



Post# 768147 , Reply# 3   7/5/2014 at 09:39 (3,582 days old) by whirlcool (Just North Of Houston, Texas)        

Looks like you are pretty much right on target with the items/decades.

Post# 768148 , Reply# 4   7/5/2014 at 09:40 (3,582 days old) by paulg (My sweet home... Chicago)        
Central Vacuum Cleaners

paulg's profile picture
Is something I would add as a glamour product of the time.
Which decade? Dunno.


Post# 768155 , Reply# 5   7/5/2014 at 09:57 (3,582 days old) by xraytech (Rural southwest Pennsylvania )        

xraytech's profile picture
Can't forget the VCR in the 80s

Post# 768156 , Reply# 6   7/5/2014 at 10:05 (3,582 days old) by turquoisedude (.)        

turquoisedude's profile picture

Central vacs - good one - they seemed to be a big deal here in Canada in the 70s and 80s!

 

I guess ironers were probably a status symbol in the 50s too.  


Post# 768165 , Reply# 7   7/5/2014 at 10:54 (3,582 days old) by stevet (West Melbourne, FL)        
KA mixers....

KitchenAid mixers have been around since the early 20's. I have a Model 3B from the late 40's that I still use and it works like it is brand new!
Food Processors were much in vogue as stated in the 80's and forward.


Post# 768297 , Reply# 8   7/6/2014 at 00:23 (3,582 days old) by tolivac (greenville nc)        

I have seen Cuisnart Food processors even in the 70's those early versians built for them by RoboCoupe are PRIZED machines-VERY RARE-folks won't give them up!You started and stopped those by moving the lid on the container.There was no switch on the base.It has been said that food processors were used commercially in France even as early as the 50's.Again made by RoboCoupe-they made the first food processors-they are still with us today-they cator to commercial markets-they do make a machine for home use under "Magimix".Williams Sonoma and Chefs Choice catalogs listed those.

Post# 768310 , Reply# 9   7/6/2014 at 03:01 (3,581 days old) by electron1100 (England)        
the 70s

electron1100's profile picture
you have hifi separates but I remember quadraphonic hifi as being a status item then.

Gary


Post# 768325 , Reply# 10   7/6/2014 at 06:15 (3,581 days old) by tolivac (greenville nc)        

"Quad"or Quadrophonic didn't really catch on in those days-was aimed for music listening.It survives today in another form 5.1 and 7.1 sorround sound formats for movie soundtracks.Now we have theaters installing Dolby Atmos and Auro soundtracks that have even more channels-speakers above the listeners-in front of the screen.And they add two other channels for behind the screen.Some BluRay movies are encoded for these-in hopes that amp makers will make compable amps for this.What will the Mrs think with MORE speakers in the home theater room?In theaters the above speakers are flush ceiling mounted.

Post# 768654 , Reply# 11   7/7/2014 at 04:56 (3,580 days old) by electron1100 (England)        
Umm

electron1100's profile picture
Hi Tolivac

I think you miss my point about Quadraphonic Hi-fi back in the 1970s, my point was about it being a status symbol in the UK Hi-fi world back then, not as to whether it was a success or not.

Gary


Post# 768666 , Reply# 12   7/7/2014 at 05:53 (3,580 days old) by Frigilux (The Minnesota Prairie)        

frigilux's profile picture
I would add cassette tapes to the very early 1970s. Remember seeing one of the first examples in a Sears Christmas catalog.

Prognostication 2015-2020: Google Glass (or similar)


  View Full Size
Post# 768668 , Reply# 13   7/7/2014 at 06:04 (3,580 days old) by tolivac (greenville nc)        

Yes,didn't relize you were talking about UK.Only very breifly here.Remember Elcassettes?Remember seeing them and their machines only a couple times.Another audio "dodo".

Post# 768671 , Reply# 14   7/7/2014 at 06:13 (3,580 days old) by electron1100 (England)        
Elcaset

electron1100's profile picture
That was such a shame, I owned two Sony Elcaset machines the 5 and the 7 and they were both stunning in terms of there performance and build quality, the only non reel to reel machines that could draw me away from reel to reel.
Ah well all the good stuff goes :-(

Gary


Post# 769015 , Reply# 15   7/8/2014 at 03:37 (3,579 days old) by tolivac (greenville nc)        

Guess the Elcassette died from---Folks already happy with RR machines and not wanting to change.Philips cassette machine owners happy with theirs and not wanting to change-the 70's was the time when Philips style cassettes went from a "dictation" quality format to a Hi-Fi one thanks partly to Dolby,and cassette tape oxide formulas that improved the recording quality of the tapes.-Chromium and Metal type tapes as I vaguely remember.

Post# 769016 , Reply# 16   7/8/2014 at 04:43 (3,579 days old) by arbilab (Ft Worth TX (Ridglea))        

arbilab's profile picture
The 'status' joke was on the passengers of the 8-track boat. Even back in the day you'd see 8trk carts on the side of the road with their guts hanging out like a runover skunk, hearing the echo of the owner yelling expletives around "you've jammed on me for the last time". Oh, and when they DID work they sounded like listening to music-on-hold over the phone.

OTOH, the one thing I NEVER saw was a car with a R2R in it, though that would have been more practical than car TURNTABLES which I DID see.

Early 50s: central air. Only one house on our circle had it, and it wasn't ours.


Post# 769019 , Reply# 17   7/8/2014 at 05:12 (3,579 days old) by statomatic (France)        
Compact cassette

statomatic's profile picture
The Dolby B was a consumer version of the Dolby A, dolby B is used on most of the decks.
In 1981 the Dolby C was released, it provides a better noise reduction but needs a very precise alignment of the tape deck (bias, sensitivity azimuth...) to prevent audio artifacts like pumping effect and treble loosing.
The DBX was the best in terms of noise reduction and dynamic range expansion but it also needs a perfect alignment and to be decoded (DBX equipped are rare).
There was several other noise reduction systems that were less popular like the ANRS (JVC), the ADRES (Toshiba / Aurex), Super D (Sanyo) and Dolby S (used on some 90's decks).

The tapes gets some great improvements too, BASF invented the chromium dioxide (type II) tape in the early 70's.
The Japanese manufacturers invented "chrome equivalent" tapes (TDK "Super Avilyn", Maxell "Epitaxial", Fuji "Beridox") to not have to pay the taxes to Sony (which was the exclusive distributor in Japan).
In 1975 Sony created the "FeCr" (ferrichrome or type III) tape which has two oxide layers, this tape was excellent when used on a deck with "FeCr" because it has the advantages of ferric tape (great bass response) and chrome tape (low noise and great treble response).
In 1979 the metal (type IV) tape was invented, it uses a pure iron (non oxidized) pigment.
The FeCr tape manufacturing stopped in the early 80's when the metal tape started to have a better success.
In the early 80's there was also cassette shells improvements like the TDK MA-R (metal shell), the Sony Metal Master (ceramic shell), and several others with new plastic formulations.

Yes I don't collect only vintage washing machines !




Post# 769073 , Reply# 18   7/8/2014 at 10:15 (3,579 days old) by electron1100 (England)        
Oh yes

electron1100's profile picture
ha ha we are drifting off topic here but yes being the age I am all this gear etc was around when I could buy it and enjoy it and still do, dyed in the wool analogue fan here.
:-)


Post# 769074 , Reply# 19   7/8/2014 at 10:16 (3,579 days old) by DADoES (TX, U.S. of A.)        

dadoes's profile picture
 
I had three cassette decks with Dolby C, still have one of them.


Post# 769091 , Reply# 20   7/8/2014 at 11:19 (3,579 days old) by washer111 ()        
One for the Late-70s/Early-80s

Our monstrous single-story home we vacated several years ago (5 bedrooms, 2.5 bathrooms/Ensuite, Laundry, Kitchen, Games, Dining, Formal Dining, Lounge, Little-Lounge {Part of "Dining" and hallway}, Study) was built in 1987, and had the following:

 

~ "Valet" VM1200 Intercom System.

Several of the stations could receive music and sometimes audio messages (Though setting the sliders was "finicky"), but often could not communicate.

The Doorbell played an electronic Fur-Elise... Boy that song is annoying to hear now. You couldn't speak to them, either. 

In the "Little-Lounge," there was a 5-pin DIN connector so you could run your Hi-Fi throughout the house. Now THAT is surround sound, LOL. Interestingly, that wire would have run from one side of the house, to the other. That probably wouldn't have helped signal quality either. 

The system was repaired when we moved in around 2000, for doorbell functionality. The touchpad for the radio was irritating to use, and becoming increasingly sensitive in its age. 

 

~Valet Ducted Vacuum. An earlier model, and working well. One outlet never was quite right. Used little switches in EACH outlet to start the system. Trouble is, what if the wires break?!

Again - this was broken on arrival. Previous residents had used it to vacuum their dog's mess up... 

Another breakdown around 2007. The replacement motor was evidently weaker and seemed less powerful. Made a horrendous noise, and dust in the garage, too!

 

Can't imagine Chinese builders/owners of the house would ever spec such equipment. Considering the floor-tiles were loose and misaligned, who knows how those products went in :/ 

 

Pictures:

1. Doorbell Unit

2. Variation of the Room-Station

3. Ducted Vacuum similar to ours (Ours was a Dark-Grey colour, with a yellow "VALET" logo)

4./5. The Base-Station for the Intercom. Manual here: valet.com.au/uploads/103/24/Vale...

There are 4 switches, "Monitor-Master," "Door-Lock," "Front Door," "House-Call."

The bottom row of switches allow control of Private or System-Wide Intercom, and the sliders allow control of Intercom, Music and Monitor functions. 

Up the top are all the radio controls and input controls. 

 

 


  Photos...       <              >      Photo 1 of 5         View Full Size
Post# 769092 , Reply# 21   7/8/2014 at 11:22 (3,579 days old) by pcasa (Dallas. Tx)        
Ankarsrum & Aga

pcasa's profile picture
Two great designs - one older one newer that have great cache



  View Full Size
Post# 769093 , Reply# 22   7/8/2014 at 11:24 (3,579 days old) by pcasa (Dallas. Tx)        
ankarsrum

pcasa's profile picture
.. not sure where this photo went - I would love to own one of these!

Post# 769094 , Reply# 23   7/8/2014 at 11:30 (3,579 days old) by pcasa (Dallas. Tx)        
central vac

pcasa's profile picture
.. my parent's home was built with central vac in 1971 - it is still working well - there are "portholes with covers" which receive the vacuum hose and when shoved into the connection - the unit activates - central unit located in the garage

Post# 769107 , Reply# 24   7/8/2014 at 12:01 (3,579 days old) by retropia ()        

We lived briefly in a model home built in around 1960 or so, while Mom and Dad were having a house built. The model home was not especially great, but it was loaded with "upsell" options, like a sputnik chandelier, and a built-in "planter" filled with plastic greenery. The planter was faced in styrofoam brick.

It also had a Nutone intercom system, and the base unit, located in the kitchen, had an AM-FM radio so you could pipe music throughout the house. The built-in intercom system seemed a popular "prestige" option, at least into the 1970s.

A 1979 up-market condo I lived in had a Sub Zero built-in refrigerator, and a Jenn-Air drop-in combo cooktop/grill and oven. I suppose built-in appliances are still considered prestigious, but not to the extent they were back in the 1960s and 1970s.

Nowadays, for the prestigious look, people want appliances in their homes that look like they came out of a restaurant kitchen.


Post# 769287 , Reply# 25   7/8/2014 at 23:53 (3,579 days old) by redcarpetdrew (Fairfield, CA)        

redcarpetdrew's profile picture
I still have customers with the Nutone intercom/music system. Two have an optional record player that dropped down from the wall.

I would say that having a 3D T.V. Started out as a status symbol.

RCD


Post# 769289 , Reply# 26   7/9/2014 at 00:16 (3,579 days old) by beekeyknee (Columbia, MO)        

beekeyknee's profile picture
For the 1960's - Central air conditioning, for most of the United States anyway.


Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy