Thread Number: 56184
A Corning Ware Quest:
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items
Post# 785277   9/23/2014 at 11:01 (1,980 days old) by danemodsandy (The Bramford, Apt. 7-E)        

danemodsandy's profile picture
Hi:

I'm looking for a piece to complete my Corning Ware Broil 'n Serve platter. I have the platter, and I have the serving cradle, but I have not been able to find the broiling rack that goes inside the platter for broiling.

Does anyone have a spare of this item they'd be willing to sell? I'm not actually ever going to use it, but I like my goodies complete.

I am unsure whether this item is aluminum or stainless; I've only seen it in photos. Any unbent condition should be okay; I can polish it.

A photo from the 1967 full-line catalog is below - I'm only looking for the rack inside the platter, not the platter nor the serving cradle. Got 'em.

Thanks!





Post# 785287 , Reply# 1   9/23/2014 at 13:27 (1,980 days old) by mikael3 (Atlanta)        

I hope the fellow at CorningWare411 doesn't mind, but I've taken this one picture from his collection. I think this is similar to what you're looking for. This is listed as a P-19-B with optional rack. Your ad says P-29, so I guess it's not identical--but those Corning Ware codes can be tricky.

He doesn't have much information on it, but he might respond to an inquiry.


  View Full Size
Post# 785318 , Reply# 2   9/23/2014 at 18:17 (1,980 days old) by Tomturbomatic (Beltsville, MD)        

I know it's not aluminum. It's probably stainless steel. Mine's been through the dw with no loss of gloss.

Post# 785456 , Reply# 3   9/24/2014 at 11:24 (1,979 days old) by danemodsandy (The Bramford, Apt. 7-E)        
Tom:

danemodsandy's profile picture
Looking at the photo John posted, it appears that the rack could indeed be stainless, or perhaps really good chrome-plate.

John: The P-29 designation in the photo I posted is for a set that included an open roasting pan with rack in addition to the Broil 'n Serve platter. The Broil 'n Serve on its own was indeed P-19-B. I cropped the open roaster out of the photo because it wasn't relevant to my question.

I'm also finding that the Broil 'n Serve was offered with or without the rack at various points in its history. In addition, it was available with two different serving cradles - the round-handled one shown in the photo I posted, and another version with flat, rectangular-profile handles. The rectangular-profile handles are on the serving cradle I own.

At any rate, if anyone ever turns up a rack all by its lonesome, I'd be very interested.


Post# 785488 , Reply# 4   9/24/2014 at 14:48 (1,979 days old) by hippiedoll (tucson, arizona u.s.a.)        
hey sandy....

hippiedoll's profile picture
not to get your hopes up but, i did see a bunch of corningware at this one second handstore that i go to occassionally, the last time i went. i will try to go by there today and see if i see anything like that.
i've gotten acquainted pretty good with the lady there. i'll see if she will sell me just that one insert (if i find it there).

after i've gone there, i'll post back & let you know what i find.
also, i think i seen some of the plastic lids you were looking for at one time. are you still wanting the plastic lids??

send me an email, a.s.a.p and let me know so that i can go and see if they are still there.
give me measurements of the lids.

i get alerts on my phone when i get emails. so send me an email soon so that i can check it out for you, before someone else buys these things.


Post# 786691 , Reply# 5   10/1/2014 at 10:50 (1,972 days old) by danemodsandy (The Bramford, Apt. 7-E)        
UPDATE:

danemodsandy's profile picture
The rack may have surfaced - Kevin vintagekitchen thinks he has one and will be in touch when he finds it in his stash.

Christina - I'm sorry I didn't check back sooner! I wasn't ignoring you. The lid I'm looking for is pretty rare - it's the plastic lid for the loaf pan. It's rectangular, not square like most other Corning lids. Can't imagine your seller has one of them running around loose, but I'd be very tickled if they did. A photo is below:


Post# 786799 , Reply# 6   10/2/2014 at 02:01 (1,971 days old) by hippiedoll (tucson, arizona u.s.a.)        
ok.....

hippiedoll's profile picture
now that i see what it looks like and know that it is the rectangle plastic lid for a loaf pan, i know what to look for.

but i think you're right, i remember seeing the square plastic lids.

i will still check and see if there is the loaf pan there and if it has the plastic lid on it or for it. and if so, i will see if she will just sell that too me. ya never know, all we can do is ask. and the worst she can say is "no" to just the lid and want to sell me the pan with the lid??

i will check it out for you sandy & we'll see what happens. i'll get back to you & let you know if i find the plastic lid for you.

keep your fingers crossed.....

;o)


Post# 787102 , Reply# 7   10/3/2014 at 18:17 (1,970 days old) by hippiedoll (tucson, arizona u.s.a.)        
update.....

hippiedoll's profile picture
bad news sandy,

i just came back from that 2nd handstore and they didn't have the corningware loaf pan. all they had were the square casserole dishes.
i'm sorry...

:o(


Post# 787138 , Reply# 8   10/3/2014 at 21:25 (1,969 days old) by danemodsandy (The Bramford, Apt. 7-E)        
Christina:

danemodsandy's profile picture
Please don't think that's bad news.

That's the news I always get on that lid, LOL!





Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy