|
Thread Number: 66409
/ Tag: Wringer Washers
Swapping wringers |
[Down to Last] |  |
| Post# 890186 7/20/2016 at 17:12 (2,837 days old) by jlbowman (Oklahoma) | ||
|
Will the wringer units on the '50s and newer Maytag wringer washers interchange? | ||
|
Post# 890195 , Reply# 1 7/20/2016 at 17:46 (2,837 days old) by abcomatic  (Bradford, Illinois) |
||
|
They should be able to be changed. I am not sure if the wringers on the round tube machines are the same size as the square tub machines. Have fun washing. Gary | ||
| Post# 890213 , Reply# 2 7/20/2016 at 20:27 (2,836 days old) by bradross (New Westminster, BC., Canada) | ||
Not all models are interchangeable... | ||
|
Post# 890218 , Reply# 3 7/20/2016 at 21:27 (2,836 days old) by abcomatic (Bradford, Illinois) |
||
|
Yes, Brad is correct. Happy washing. Gary | ||
| Post# 890310 , Reply# 5 7/21/2016 at 14:29 (2,836 days old) by jlbowman (Oklahoma) | ||
|
Silly iPad. I meant to say "repainting the skirt" | ||
|
Post# 890319 , Reply# 6 7/21/2016 at 15:48 (2,836 days old) by maytagmike (Burlington, Vt) |
||
swapping wringers | ||
| Post# 896498 , Reply# 7 8/30/2016 at 22:53 (2,795 days old) by BigTerKC (Kansas City) | ||
castors
Where did you get new castors at?
I have a couple of Maytag wringers I'm planning on fixing up and both of them are in need of new castors. I've seen some used one's on eBay, but was wondering if there's another outlet to get them from. Or if I can buy some from Grainger or someplace like that. What size would I look for? Wringing clueless in KC Terry | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
