Thread Number: 72453  /  Tag: Modern Dryers
Speed Queen electric dryer - fried wire
[Down to Last]'s exclusive eBay Watch:
scroll >>> for more items
Post# 957440   9/13/2017 at 21:39 (376 days old) by dzr (Nj)        

So, my 6 year old Speed Queen electric dryer blew a circuit breaker and stopped heating. The repair person showed me a nicely burned wire. He replaced it and it's fine now.

What would cause that? Is there room for concern? The roller was replaced about a month ago. They claim there is no connection. It's out of warranty, but do I call Speed Queen?


Post# 957465 , Reply# 1   9/14/2017 at 00:12 (376 days old) by rp2813 (The Big Blue Bubble)        

rp2813's profile picture

It would depend on what the wire was connected to.  My step-daughter's SQ dryer had a similar problem and I think it was related to a thermostat or other temperature related component.  Loose connections can often be the culprits with this type of thing.

Post# 957668 , Reply# 2   9/15/2017 at 15:01 (375 days old) by Combo52 (Beltsville,Md)        
Which Wire Connection Failed

combo52's profile picture
If it was on or near the heater and espically if it was the left rear roller that failed you vent system is partly cloged or certainly not ideal. A bad vent will cause the heater area to run hot and cause premature failures.

The component that the failed Wire was connected to weather the heater or a safety thermostat should have also been replaced to ensure a lasting repair.

John L.

Post# 957702 , Reply# 3   9/15/2017 at 19:27 (374 days old) by Lorainfurniture (Cleveland )        
What John said

There is a common failure wire ( common in a speed queen way i.e. Not common) near the timer or the heat selection switch. Replace the offending wire and whatever it plugs in to.

Post# 957865 , Reply# 4   9/17/2017 at 12:02 (373 days old) by dzr (Nj)        

Thanks. The repair person reached it from removing the front bottom panel. I can't see that it would be either switch.

Post# 957904 , Reply# 5   9/17/2017 at 19:01 (372 days old) by dzr (Nj)        

I also had the vent system professionally cleaned about 6 months ago.

Post# 957915 , Reply# 6   9/17/2017 at 20:21 (372 days old) by Lorainfurniture (Cleveland )        

That was a heater wire. Odd that it would fail so soon.

Post# 958125 , Reply# 7   9/19/2017 at 08:38 (371 days old) by mrb627 (Buford, GA)        
Vibration Issue

mrb627's profile picture
My guess would be a vibration issue causing the insulation on the wire to rub against a foreign object, wear away, and eventually short. If another component caused the short, it would have been replaced with the wire, right?


Post# 958167 , Reply# 8   9/19/2017 at 16:46 (370 days old) by Combo52 (Beltsville,Md)        
Bad wire connection in the heater circuit

combo52's profile picture
This is very common on electric dryers, that I've had a lot of use.

It was not caused by vibration, but most likely aggravated by a less than ideal vent situation, even though you say the vent system was cleaned recently is it really to the manufacturer specifications ?

I would suggest running the dryer with the lower panel removed and a heavy load in it for a few minutes and see just how hot it's getting in the heater area if it's glowing bright red your vent system needs help.

John L

Post# 959755 , Reply# 9   9/28/2017 at 23:08 (361 days old) by dzr (Nj)        

Thank you!

Forum Index:       Other Forums:                      

Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In

New Members
Click Here To Sign Up.

Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy