Thread Number: 76852
/ Tag: Vintage Automatic Washers
Maytag Ga208 |
[Down to Last] |
|
Post# 1007162 , Reply# 1   9/14/2018 at 10:00 (2,051 days old) by TrainGuy (Key West, FL)   |   | |
Checkrate/Likes
 
     
|
Post# 1007171 , Reply# 2   9/14/2018 at 10:31 (2,051 days old) by DADoES (TX, U.S. of A.)   |   | |
Checkrate/Likes
 
1    
The model number for searching parts is A208. The leading G is a code for the color. This is the bearing kit. This is the tub seal kit. This is an example of the spanner wrench. |
Post# 1007189 , Reply# 4   9/14/2018 at 14:13 (2,051 days old) by RP2813 (Sannazay)   |   | |
Checkrate/Likes
 
     
|
Post# 1007602 , Reply# 6   9/17/2018 at 18:07 (2,048 days old) by super32 (Blackstone Massachusetts)   |   | |
Checkrate/Likes
 
     
|
Post# 1007768 , Reply# 7   9/19/2018 at 03:25 (2,046 days old) by askolover (South of Nash Vegas, TN)   |   | |
Checkrate/Likes
 
     
|
Post# 1007844 , Reply# 10   9/19/2018 at 16:32 (2,046 days old) by jeff_adelphi (Adelphi, Maryland, USA)   |   | |
Checkrate/Likes
 
1    
|
Post# 1007847 , Reply# 11   9/19/2018 at 17:23 (2,046 days old) by RP2813 (Sannazay)   |   | |
Checkrate/Likes
 
     
|
Post# 1007872 , Reply# 12   9/19/2018 at 20:18 (2,045 days old) by good-shepherd (New Jersey)   |   | |
Checkrate/Likes
 
     
Yeah, thats what I meant. |
Post# 1007874 , Reply# 13   9/19/2018 at 20:20 (2,045 days old) by good-shepherd (New Jersey)   |   | |
Checkrate/Likes
 
     
Here: www.automaticwasher.org/c... |
Post# 1008888 , Reply# 14   9/28/2018 at 13:39 (2,037 days old) by XopherL (Pennsylvania)   |   | |
Checkrate/Likes
 
     
Im having trouble getting the old bearing off, its really stuck on there. Any tricks to get it? |
Post# 1008889 , Reply# 15   9/28/2018 at 13:48 (2,037 days old) by good-shepherd (New Jersey)   |   | |
Checkrate/Likes
 
     
You mean the tub bearing I presume? They usually press out with foot pressure being careful not to bend the tub. Could try large channel lock pliers to twist it loose. |
Post# 1010214 , Reply# 17   10/9/2018 at 15:15 (2,026 days old) by eurekastar (Amarillo, Texas)   |   | |
Checkrate/Likes
 
1    
|
Post# 1010244 , Reply# 18   10/9/2018 at 21:50 (2,025 days old) by combo52 (50 Year Repair Tech Beltsville,Md)   |   | |
Checkrate/Likes
 
     
|