Thread Number: 77652
/ Tag: Modern Automatic Washers
Front loaders or HE top loaders - Which would you choose? |
[Down to Last] |
Post# 1016615   12/3/2018 at 02:51 (1,970 days old) by AquaCycle (West Yorkshire, UK)   |   | |
Checkrate/Likes
 
1    
Hi all,
I’m currently on holiday in Mauritius visiting my partners family. I’ve noticed during my time here that the market is a pretty even split between front load and HE top load machines. This got me thinking about why people would choose one or the other. In the U.K, we have no choice. But to those in other parts of the world, if you were to choose between a front load machine or HE top load machine, which would it be and why? (Awaiting a barrage of comments saying “neither, I’d choose a traditional toploader” 🙄) |
|
Post# 1016618 , Reply# 1   12/3/2018 at 04:04 (1,970 days old) by askolover (South of Nash Vegas, TN)   |   | |
Checkrate/Likes
 
6    
Front loader, hands down. I can fill it full and everything comes out clean. Less wear and tear on my clothes (still using the same bath towels for 15 years) even with chlorine bleach. Excellent rinsing (my Asko rinses 4 times, Miele rinses 3). Spin is so much faster...clothes dry quicker. Less water usage. And these two machines heat their own water beyond what other brands could (of available models in the US anyway at their time). |
Post# 1016621 , Reply# 2   12/3/2018 at 05:12 (1,970 days old) by appnut (TX)   |   | |
Checkrate/Likes
 
3    
|
Post# 1016645 , Reply# 3   12/3/2018 at 08:31 (1,970 days old) by norgeway (mocksville n c )   |   | |
Checkrate/Likes
 
1    
I WOULD chose a frontloader,,,,BUT I want one that works, BENDIX or WESTINGHOUSE!! |
Post# 1016651 , Reply# 4   12/3/2018 at 09:17 (1,970 days old) by Pierreandreply4 (St-Bruno de montarville (province of quebec) canada)   |   | |
Checkrate/Likes
 
     
if I had to chose today I would go with a classic topload washer like this one Inglis royal100 with matching side door dryer
|
Post# 1016653 , Reply# 5   12/3/2018 at 09:27 (1,970 days old) by AquaCycle (West Yorkshire, UK)   |   | |
Checkrate/Likes
 
2    
|
Post# 1016655 , Reply# 6   12/3/2018 at 09:56 (1,970 days old) by marky_mark (From Liverpool. Now living in Palm Springs and Dublin)   |   | |
Checkrate/Likes
 
1    
Are the pulsator-style top loaders in Mauritius designed to work the way that pulsator top loaders have always worked, i.e. fill with enough water to cover the load completely, just as with traditional agitator top load washers? Or are they the type that are now sold in the US and Canada that have had an HE makeover and use far less water on the normal cycle?
I was wondering if the HE versions of pulsator machines were only sold in the USA and Canada as I've never seen them in other countries that use pulsator machines. Although they look identical. This post was last edited 12/03/2018 at 15:25 |
Post# 1016668 , Reply# 8   12/3/2018 at 11:35 (1,970 days old) by IowaBear (Cedar Rapids, IA)   |   | |
Checkrate/Likes
 
2    
Like the others I would choose a front load.
However there are members here who have HE top loads and get good results. The key is being knowledgeable about how to load them and what cycles to use.
Not everyone can be bothered and a lot of people (or their household members) are going to just pack in an oversized unsorted load and press start.
Front loaders are going to be more forgiving in those cases. |
Post# 1016677 , Reply# 9   12/3/2018 at 13:01 (1,970 days old) by lakewebsterkid (Dayton, Ohio)   |   | |
Checkrate/Likes
 
1    
We have had a great deal of success with our Whirlpool Duet over the years. I do, however, miss a deep fill to wash delicates. Though, the cleaning is much better in the front load. Again, the reasons why I would buy another one are posted above. |
Post# 1016678 , Reply# 10   12/3/2018 at 13:12 (1,970 days old) by thomasortega (El Pueblo de Nuestra Señora de Los Angeles de Porciúncula)   |   | |
Checkrate/Likes
 
1    
Definitely front loaders. Impeller type HE top load washers are OK if you know how to sort and load it properly, but front loaders or horizontal axis top loaders are far superior. |
Post# 1016682 , Reply# 11   12/3/2018 at 13:47 (1,970 days old) by AquaCycle (West Yorkshire, UK)   |   | |
Checkrate/Likes
 
     
Mark, definitely a combination of both styles of pulsator TL. Some seem more deep filling than others, with some sensing and saturating the load whilst others tend to fill at the bottom and be “dry” on top, though I have only seen 3 in action in my time here so I don’t take that as overly reliable.
My MIL has a nice LG front loader which is the same as what we get in the U.K. Other brands available in both FL and TL are Sharp, Midea, Ocean, Samsung, Pacific, Hitachi, Ariston and Westpoint. Bosch and Miele are both available but very expensive. |
Post# 1016688 , Reply# 12   12/3/2018 at 14:48 (1,970 days old) by thor (Buenos Aires)   |   | |
Checkrate/Likes
 
     
Could you ask if people in Mauritius wash their clothes in cold water only? Maybe that's the reason HE TLs are popular. HE TLs wash way better in cold water only than any FL does or is able to do. |
Post# 1016691 , Reply# 14   12/3/2018 at 15:05 (1,970 days old) by marky_mark (From Liverpool. Now living in Palm Springs and Dublin)   |   | |
Checkrate/Likes
 
     
Ah ok that's interesting. Thanks for letting me know.
In answer to your original question: if I had to choose between a FL and a HE impeller TL, I would go for the FL. However that's only based on what I've read as I only have experience of using FLs and traditional agitator TLs. I have looked at many HE impeller machines in the US and Canada but only in stores, I've never had the opportunity to use one. I'd like to try them. The biggest ones certainly are massive inside. CR finds in their particular tests that HE TLs are typically rougher on clothes and don't clean as well as FLs. Here in Spain, I have seen used TL impeller machines for sale (they appear to be non-HE). The writing on them is in Spanish, so I suspect they have probably come over from Hispanic America. I would like to try one. I suspect they would work very well and would be much gentler on clothes compared to the modern HE versions sold in the US and Canada. But that's just a guess. |
Post# 1016695 , Reply# 15   12/3/2018 at 16:00 (1,970 days old) by MrAlex (London, UK)   |   | |
Checkrate/Likes
 
     
|
Post# 1016812 , Reply# 18   12/4/2018 at 18:53 (1,969 days old) by cfz2882 (Belle Fourche,SD)   |   | |
Checkrate/Likes
 
1    
I have a 2010 VMW Cabrio and must say it is a washing SOB if you get the load size just so...:)I do hate when it gets stuck on a rebalance routine-constantly draining and refilling as it tries to balance a load. |
Post# 1016843 , Reply# 19   12/4/2018 at 22:38 (1,969 days old) by twintubdexter (Palm Springs)   |   | |
Checkrate/Likes
 
     
If you owned a front loader and suddenly inherited my back I guarantee you put the machine on it's back and see if it would work properly. The dryer is challenge enough.
View Full Size
|
Post# 1016845 , Reply# 20   12/4/2018 at 23:08 (1,969 days old) by ea56 (Cotati, Calif.)   |   | |
Checkrate/Likes
 
     
The worst washing machine out of the 19 I’ve owned was a 2010 Cabrio! What a POS! That constant rebalancing was a real PITA! With the refilling over and over with rinse water in its futile attempts to balance, what a waste of both water and time. I agree, though with Brendan, when it worked properly, it did wash very well. But I don’t expect to have to babysit an automatic washer, a wringer washer would be way less hassle than one of these Cabrios. The only good thing that came out of owning that
Cabrio is that I discovered AW.org while searching the net for an explanation on why that washer couldn’t balance properly. I always loaded it as directed with the clothes distributed evenly around the tub edge, but the loads never stayed that way during the cycle. I really believe that the main cause of the balancing problem was the lack of a center post to keep the load distributed around the outside edge of the tub when it began to spin. I have a Maytag Centennial now that I’ve owned for 2 years. It has an agipeller, and that bad boy NEVER goes out of balance, washes and rinses beautifully, and completes every load in about 50 mins. Eddie This post was last edited 12/04/2018 at 23:30 |
Post# 1016860 , Reply# 21   12/5/2018 at 01:01 (1,969 days old) by AquaCycle (West Yorkshire, UK)   |   | |
Checkrate/Likes
 
     
This is the type of toploader that’s available here. I think you can manually select the water level. The 3 I’ve seen in action have at the very least covered the load.
CLICK HERE TO GO TO AquaCycle's LINK |
Post# 1016866 , Reply# 22   12/5/2018 at 02:31 (1,968 days old) by AquaCycle (West Yorkshire, UK)   |   | |
Checkrate/Likes
 
     
I managed to get a sneaky snap of my partners grandma’s washer. She’s just turned 100 and still does all her own laundry.
View Full Size
|
Post# 1016874 , Reply# 23   12/5/2018 at 05:49 (1,968 days old) by askolover (South of Nash Vegas, TN)   |   | |
Checkrate/Likes
 
2    
|
Post# 1016882 , Reply# 24   12/5/2018 at 07:59 (1,968 days old) by washerguy02 (Manchester )   |   | |
Checkrate/Likes
 
     
Hi Chris
Nice to see you back posting here on auto washer. Been a while since you last did. My grandparents and relatives in India have HE top loader washers. My opinions on them is they seem quite fun to use. But what I think about them is they can waste water. The ones in India fill from cold only. They don't heat water. I think it would be better if they had a hot fill aswell. They do spin stuff quite well spending quite a long time on low speeds which give them quite good results. I think with cold fill only they could just build up mould inside the machine and cause bacteria on towels and bedding to grow and lurk. If they had hot fill it would have high chance of less mould and keep the machine clean. The good things are the cycle times are nice and shorter. I think even a Hoover Logic wouldn't waste as much water as a top loader. I prefer front loaders because they don't waste as much water (even old 80s Hoovers), have heating elements which heat water to higher temperatures especially for towels and bedding and stuff that need higher temperatures so there is less grime, the hot and cold fill on my two older FLs save time and mean shorter times tho cold fill only is for if you have blood stains on clothes. Janak |
Post# 1016883 , Reply# 25   12/5/2018 at 08:24 (1,968 days old) by AquaCycle (West Yorkshire, UK)   |   | |
Checkrate/Likes
 
     
Hi Janak,
I’m still here :). I don’t post so much these days, mainly because I don’t have much interesting to post about lol. The market here in Mauritius seems to be fairly evenly split between front loaders and toploaders. My mother in law has an LG front loader and her sister has an Ocean front loader, but other relatives and friends have top loaders like the one posted above. These do seem to heat the water though, as they have different temperature options and “tub clean” hot cycles. Strangely the detergent advertising seems to aim liquid detergents at TL’s and powder at FL’s. There’s also no non-bio or colour protect. The choice is either powder or liquid. |
Post# 1017017 , Reply# 27   12/5/2018 at 22:57 (1,968 days old) by twintubdexter (Palm Springs)   |   | |
Checkrate/Likes
 
     
|
Post# 1021639 , Reply# 28   1/18/2019 at 22:00 (1,924 days old) by Spinspeed (Far North New South Wales Australia (originally London UK))   |   | |
Checkrate/Likes
 
1    
Interesting thread. If I could only have one washing machine I would always go for a front load washer. Cycles are longer but they wash and rinse really well and I would say use less water than the HE top load washers. I just think that the HE TL washers don’t move clothes thru the water as well as the revolving drum of a FL washer. FL washers are also more gentle on the clothes. As already mentioned FL washers spin much faster too.
|
Post# 1021981 , Reply# 29   1/21/2019 at 20:20 (1,921 days old) by mayguy (Minnesota)   |   | |
Checkrate/Likes
 
1    
Front loaders for me.. I just cringe when customer say they HAVE to have a top loader due to issues from Front loader! lol . I never had issues with my front loader. |
Post# 1021985 , Reply# 30   1/21/2019 at 21:07 (1,921 days old) by SudsMaster (SF Bay Area, California)   |   | |
Checkrate/Likes
 
     
I think the HE toploaders have got a lot better over the past 15 years or so. But I also follow Consumer Reports and according to them, even the best HE top loader doesn't clean as well as the front loaders.
However, the main laundry closet in this home is situated so that the washer must go on the right. No problem with the Neptune front loader, the door is easily reversed. But, AFAIK, the only other front loader washer made these days is the Electrolux, and I'm not even sure the latest ones allow reversing the washer door. So.... if i found myself in a spot with an expired Neptune and not other option, I might spring for a TOL HE top loader. But only after I've tried at least one other FL alternative... BTW, I first used an HE style top loader washer in Japan around 1996. I was working for an American company that had products made by its Japanese partner. The Japanese company thoughtfully provided a small laundry area for the American engineers. The washer had no agitator, just an impeller at the bottom of the tub. My colleagues were fascinated by it, crowding around to watch it in action. I was not so impressed, and four years later got the Neptune set. |
Post# 1022059 , Reply# 31   1/22/2019 at 14:45 (1,920 days old) by twintubdexter (Palm Springs)   |   | |
Checkrate/Likes
 
1    
Sometimes I use these to get small items like socks out of my front load dryer. My spine degeneration continues to make normal and once easy tasks very difficult. Peeling wet clothes off of a front load washer's drum after a high speed spin would be a very painful experience. As you age you'll understand.
View Full Size
|
Post# 1022096 , Reply# 32   1/22/2019 at 19:37 (1,920 days old) by mayguy (Minnesota)   |   | |
Checkrate/Likes
 
     
Yeah, that's the downfall of Frontloader if it's not up.. A co worker has a HE Top loader and she's short, and she can't reach the bottom of the top loader, She said the first time she reached in she went in too hard and hurt her breast., ;-( |
Post# 1022119 , Reply# 33   1/22/2019 at 23:13 (1,920 days old) by foraloysius (Leeuwarden, Friesland, the Netherlands)   |   | |
Checkrate/Likes
 
     
|
Post# 1022124 , Reply# 34   1/23/2019 at 00:35 (1,920 days old) by SudsMaster (SF Bay Area, California)   |   | |
Checkrate/Likes
 
     
I bought a bunch of those claw grabbers in the past couple of years (Costco was selling a good version, 2 for $10.). I use them at home and at work to pick stuff up off the floor, so my knees don't get too stressed. I've not thought of using them in a front loader, but I do use them at work to retrieve small parts that might get loose in an enclosed CNC mill.
I suppose I could try using them to get those small items that try to hide in the back of the washer (or dryer) drum. Not there yet, though ;-). |
Post# 1022134 , Reply# 35   1/23/2019 at 05:21 (1,919 days old) by appnut (TX)   |   | |
Checkrate/Likes
 
     
|
Post# 1022147 , Reply# 36   1/23/2019 at 07:53 (1,919 days old) by twintubdexter (Palm Springs)   |   | |
Checkrate/Likes
 
1    
The stool in front of a front-load washer or the dryer is a good idea and works for most people. Unfortunately I'm sort of a special case. In addition to my back problems, doctors want to replace my left shoulder (I'm left-handed) so even using that grabber thing is difficult. Getting up and down from a stool or chair is no picnic. The cleaning ladies will do laundry but are only here every 3 weeks and they're too expensive for poverty-level me to afford as it is.
There is a bright spot on the horizon. I'm scheduled for spine surgery at the end of February. The shoulder will remain a problem until I decide if a replacement is in order. The new Speed Queen top loader will still be in the garage waiting to be moved to my laundry room after surgery. I guess I'm stuck with it for awhile. I do sort of insist on a washer I can use with it open full-time. That might get messy with a front loader. |