|
Thread Number: 79391
/ Tag: Small Appliances
KitchenAid Mixer Help Needed |
[Down to Last] |  |
| Post# 1033003 5/18/2019 at 21:51 (1,804 days old) by Xraytech (Rural southwest Pennsylvania ) | ||
 | ||
|
Post# 1033004 , Reply# 1 5/18/2019 at 22:04 (1,804 days old) by Tomturbomatic  (Beltsville, MD) |
||
|
Dripping Rust Buster down the shaft so that it runs into the socket of the paddle. | ||
|
Post# 1033010 , Reply# 2 5/19/2019 at 01:27 (1,804 days old) by RP2813 (Sannazay) |
||
 | ||
|
Post# 1033016 , Reply# 3 5/19/2019 at 04:19 (1,804 days old) by thomasortega (El Pueblo de Nuestra Señora de Los Angeles de Porciúncula) |
||
|
WD40? Wash super well later, of course. | ||
| Post# 1033099 , Reply# 4 5/19/2019 at 09:41 (1,804 days old) by norgeway (mocksville n c ) | ||
|
Take a small torch, Gently heat the shank of the paddle, being aluminum, it will expand much quicker than the steel shaft and turn loose! | ||
|
Post# 1033114 , Reply# 5 5/19/2019 at 13:06 (1,804 days old) by RP2813 (Sannazay) |
||
|
| ||
|
Post# 1033481 , Reply# 6 5/23/2019 at 17:03 (1,800 days old) by Tomturbomatic (Beltsville, MD) |
||
|
So----- Did you get satisfactory results with any of our suggestions? | ||
| Post# 1033482 , Reply# 7 5/23/2019 at 17:12 (1,800 days old) by Xraytech (Rural southwest Pennsylvania ) | ||
|
| ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
