|
Thread Number: 79497
/ Tag: Modern Automatic Washers
Speed Queen Front Loader Issues Return! |
[Down to Last] |  |
| Post# 1033987 5/30/2019 at 18:32 (2,017 days old) by stricklybojack (South Hams Devon UK) | ||
.
Well the party is once again over (for the time being at least) for this machine...I got both the wash light and the rinse light flashing, and a burnt rubber or electronics smell in the air...any ideas? The manual linked below says it’s the door lock or motor board(!)...ffs CLICK HERE TO GO TO stricklybojack's LINK | ||
|
| Post# 1034000 , Reply# 1 5/30/2019 at 20:20 (2,017 days old) by stricklybojack (South Hams Devon UK) | ||
|
.
Well looks like this old dog has learned a new trick...how to fix my SQ FL washer doohickey...and I DIDN’T have to replace, or even touch, the motor board...phew! Turns out the reason for the kaput was a stuck pump...kids pocket contents basically. THIS TIME...unlike past episodes of this tee vee show, I fixed it myself...yea me! Cleared the jam, re-plugged it in, and ran a rinse/spin test with the machine empty... ”what’s that water fall sound?” Oops! So then I re-connected the drain hose, better late than never. Then most of the spin was at speed I rarely experience while loaded (fast), and a top speed I had never experienced before! So it past that test, then i re-filled with the wet contents I removed before the repair, another rinse and spin, and all is well. This post was last edited 05/30/2019 at 20:35 | ||
Post# 1034026 , Reply# 2 5/31/2019 at 06:11 (2,016 days old) by askolover  (South of Nash Vegas, TN) |
||
 | ||
| Post# 1034031 , Reply# 3 5/31/2019 at 07:27 (2,016 days old) by arbilab (Ft Worth TX (Ridglea)) | ||
 | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
