|
Thread Number: 89382
/ Tag: Modern Dryers
Gas MT Neptune drying center Minneapolis CL |
[Down to Last] |  |
Post# 1139927 1/21/2022 at 01:10 (1,149 days old) by whirlykenmore78  (Prior Lake MN (GMT-0500 CDT.)) |
||
Gas fired unit looks to be in good shape. I would be willing to help someone save it. The unit is less than a mile from my house but I have no room for collecting now.
WK78 CLICK HERE TO GO TO whirlykenmore78's LINK on Minneapolis Craigslist | ||
|
|
Post# 1139930 , Reply# 1 1/21/2022 at 04:24 (1,148 days old) by foraloysius (Leeuwarden, Friesland, the Netherlands) |
||
 | ||
|
Post# 1139935 , Reply# 2 1/21/2022 at 06:23 (1,148 days old) by DADoES (TX, U.S. of A.) |
||
 Does anyone know the construction of the control panel? Are there mechanical switches at each button-spot like F&P panels? I'm not going to peel my Neptune TL's panel apart to check. :-) | ||
|
Post# 1139958 , Reply# 3 1/21/2022 at 10:46 (1,148 days old) by Combo52 (50 Year Repair Tech Beltsville,Md) |
||
Neptune drying cabinet control panel
It is a typical touch membrane type a control not easily repaired, they usually sell you the entire control panel at times you could get just the overlay membrane switch assembly which could be peeled off the old control panel and pressed into place.
The part has been NLA for a while you might be able to find a good used one somewhere. It’s a neat product overall cheaply made as it came out of the Norge division of Maytag it was not up to the quality Standards of Maytag certainly not as good as the Neptune front load washer. I installed a brand new one in my laundry room last year, I use it it works OK it’s kind of a cheap dryer though . John L | ||
| Post# 1139966 , Reply# 4 1/21/2022 at 11:56 (1,148 days old) by vacerator (Macomb, Michigan) | ||
|
Nice unit for langerei for drag or sexy needy people too! | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}