|
Thread Number: 89668
/ Tag: Vintage Automatic Washers
Maytag A712 Is No Longer Filling Properly |
[Down to Last] |  |
| Post# 1142706 2/21/2022 at 00:57 (795 days old) by scrubflex (bronx, new york) | ||
|
At the small water level, the washer begins to fill then stops with 3 1/2 inches of water in the tub. Using reset, the water continues to fill but, not at the set water level. The only way it will continue to fill and start agitating is I'll have to use the reset. | ||
|
| Post# 1142743 , Reply# 1 2/21/2022 at 17:25 (794 days old) by Jon (Dallas, TX) | ||
|
Check… To make sure the hose to the water level switch is still connected and in tact. If so the water level fill switch may have simply gone bad altogether. Does it operate correctly at other levels? Jon | ||
| Post# 1142766 , Reply# 2 2/21/2022 at 22:18 (794 days old) by scrubflex (bronx, new york) | ||
|
Thank you, Jon, no it's the same for all water levels. | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
