Thread Number: 90908
/ Tag: Vintage Dishwashers
KDS-18 suddenly not filling, no water |
[Down to Last] |
|
Post# 1154230 , Reply# 1   7/13/2022 at 19:23 (652 days old) by TL000 (L.A.)   |   | |
Checkrate/Likes
 
     
I hate to admit this. But in frustration just now I sort of lightly kicked the front panel several times in the area where the fill valve resides on the right. Yeah, it's apparently working again, at least for now. |
Post# 1154234 , Reply# 2   7/13/2022 at 19:34 (652 days old) by combo52 (50 Year Repair Tech Beltsville,Md)   |   | |
Checkrate/Likes
 
     
|
Post# 1154307 , Reply# 5   7/14/2022 at 17:12 (651 days old) by combo52 (50 Year Repair Tech Beltsville,Md)   |   | |
Checkrate/Likes
 
1    
|
Post# 1154308 , Reply# 6   7/14/2022 at 17:23 (651 days old) by TL000 (L.A.)   |   | |
Checkrate/Likes
 
     
Thanks. What kind of voltage is on the valve? Are replacements even available? |
Post# 1154348 , Reply# 7   7/15/2022 at 09:10 (650 days old) by combo52 (50 Year Repair Tech Beltsville,Md)   |   | |
Checkrate/Likes
 
1    
|
Post# 1154378 , Reply# 8   7/15/2022 at 18:02 (650 days old) by TL000 (L.A.)   |   | |
Checkrate/Likes
 
     
Thanks! |
Post# 1154382 , Reply# 9   7/15/2022 at 19:38 (650 days old) by qsd-dan (West)   |   | |
Checkrate/Likes
 
     
The valve you're looking for is a 4171000. It's a single valve design instead of the dual valve design Hobart originally used in your machine. It works the same. You only use one set of wires on the new valve, tape off the other wires with electrical tape.
Here's one on Ebay: https://www.ebay.com/itm/304557408141QUE... Here's a cheaper one if you want to gamble with an open box. https://www.ebay.com/itm/304557408138QUE... |
Post# 1154414 , Reply# 10   7/16/2022 at 12:49 (649 days old) by TL000 (L.A.)   |   | |
Checkrate/Likes
 
     
Thank you! |