Thread Number: 91027  /  Tag: Modern Automatic Washers
What washer to replace an ailing Whirlpool Cabrio?
[Down to Last]

Cool Washer Stuff on Amazon:
scroll >>> for more items
Post# 1155391   7/28/2022 at 11:01 by micahmcdowell (Missouri)        

Hello all,
The Cabrio which came with our house a few years ago is starting to fall apart (bad rust issues and intermittent electronics). It never washed very well, and it's time to replace before it has a fatal failure.

What's good these days in a new machine? Our needs are #1, high reliability and longevity, and #2, adequate capacity for a family of five. Not so big on fancy features or efficiency. For reference, our previous home had a Speed Queen SC27 industrial washer I put in the basement that we unfortunately couldn't take with us. Old Youtube video I made of that one is still out there somewhere. LOVED that monster, though it was hard on clothes. We prefer something slightly more domesticated this time.

Thanks!


Post# 1155395 , Reply# 1   7/28/2022 at 12:45 by luxflairguy (Wilmington NC)        

I'm confused! Your aren't interest in efficiency? WHY? Washing ability and efficiency go hand in hand! Front loaders do all this!

Post# 1155399 , Reply# 2   7/28/2022 at 13:50 by qsd-dan (West)        

qsd-dan's profile picture
#1 Speed Queen FF7 front loader for reliability/longevity. Just be aware there's no internal heater.

#2 LG4000 series with Turbowash.

#3 Speed Queen TC5003 top loader. You'll be chewing through a belt every 3-4 years on the TC5003 with a family of 5 though.


Post# 1155431 , Reply# 3   7/28/2022 at 21:48 by Stainfighter (Columbia, SC)        
this one?

stainfighter's profile picture
Post# 1155494 , Reply# 4   7/29/2022 at 12:04 by GELaundry4ever (Killeen tx USA)        
kenmore elite

I have the kenmore elite version of the lg. It does a great job cleaning and rinsing thanks to the turbowash which sears calls accelawash.

Post# 1155912 , Reply# 5   8/3/2022 at 22:16 by Bettfair (USA)        

My friend has a Kenmore of the LG anf he is happy with it :)

Post# 1155933 , Reply# 6   8/4/2022 at 10:34 by Seeitrun2006 (Commerce, GA)        
We use Samsung top load washer Model #WA50R5200AW

We’ve had it now for 2 1/2 years with no problems what so ever with a 5.0 cubic foot tub. It cleans very well. Just be sure to read the user manual for best results. We also have the matching dryer.

We had a Whirlpool top load with impeller bought in 2018 similar to model #WTW4950HW. It lasted exactly two years. The bearing seized up. The matching dryer died the following year.

LG makes good washers and dryers also!!!

Good luck!!!


Post# 1155934 , Reply# 7   8/4/2022 at 10:37 by Seeitrun2006 (Commerce, GA)        
Samsung washer

They are a little more budget friendly too price wise

Post# 1155987 , Reply# 8   8/4/2022 at 22:55 by Tomdawg (Des moines)        
Family of five

We are a family of five and I run a business out of the home. I do a load a day for business stuff and the rest is all family laundry. So far my 2 year old LG front loader is still going strong!
I have the 4370 which has turbo wash- it’s a must have in my household, we do 13-15 loads a week.

If my LG doesn’t last more than 7ish years. I would probably buy a speed queen FF7


Post# 1156050 , Reply# 9   8/5/2022 at 12:57 by WindRivers (Wind River Range, WY)        

It is helpful to know which brands and models people are having good luck with.

It's also a little disappointing to me when it's considered commendable for a machine to give just a few years of trouble free use.

But I guess it's all relative now. My Maytag Bravos lasted almost 8 months doing a couple loads a week, so I guess a machine lasting three or four times as long is doing good?

Anyway, I bought the Speed Queen TC5 with the full refund I received from Whirlpool and am very pleased with it. It is a very well constructed machine, especially compared to the Maytag, and washes well.

If the front load Speed Queen wasn't like $800 more, and I was sure it would fit in my utility room as well, I would have seriously considered it though I have an affinity for top loaders.

So it you're buying new either the SQ TC5 or FF7 is what I would recommend. If you thought your SC27 was hard on clothes you'd probably like the FF7.


Post# 1156052 , Reply# 10   8/5/2022 at 13:10 by WindRivers (Wind River Range, WY)        

@luxflairguy "I'm confused! Your aren't interest in efficiency? WHY? Washing ability and efficiency go hand in hand! Front loaders do all this!"

Greenliness is Next to Cleanliness

It's a fact of physics!


Post# 1156054 , Reply# 11   8/5/2022 at 13:24 by luxflairguy (Wilmington NC)        

This post has obviously been deleted! The poster stated he wasn't worried about efficiency! I was asking WHY? No answer! Greg

Post# 1156062 , Reply# 12   8/5/2022 at 14:02 by WindRivers (Wind River Range, WY)        

Hi Greg,

What post has been deleted?

I've also noticed the OP hasn't yet replied with any updates, I hope it works out for him.

I think it's clear from his post that he is focused on durability and longevity. Actually that's what he said. It comes above features and efficiency for him. I don't believe he is saying that he doesn't want efficiency, just that it's not highest on his list. I don't see that he has anything to answer for. Reliability and durability are also two of my highest qualities for any product I get.

If he gets a reliable product with longevity, he's doing more for the environment than than buying an HE machine that goes into a landfill, or even gets recycled, in a couple of years.



Post# 1156078 , Reply# 13   8/5/2022 at 17:34 by DADoES (TX, U.S. of A.)        

dadoes's profile picture
 
The OP's 2nd paragraph, 3rd sentence states "Not so big on fancy features or efficiency."


Post# 1156080 , Reply# 14   8/5/2022 at 18:05 by kenwashesmonday (Carlstadt, NJ)        
"Not so big on fancy features or efficiency."

If you're only washing 3 or 4 loads a week, and you live where water actually falls out of the sky, longivity is more imporant that energy efficiency.


Post# 1156092 , Reply# 15   8/5/2022 at 19:33 by luxflairguy (Wilmington NC)        

Thank you Glenn! I knew I wasn't wrong!

Post# 1156095 , Reply# 16   8/5/2022 at 19:50 by WindRivers (Wind River Range, WY)        

Nobody said you were wrong, except where you claimed a post had been deleted.

It's still very clear to me that the OP places reliability and longevity above features and efficiency, exactly as he stated.

That's perfectly reasonable to me.


Post# 1156106 , Reply# 17   8/5/2022 at 21:14 by Pierreandreply4 (St-Bruno de montarville (province of quebec) canada)        
just my toughs

pierreandreply4's profile picture
there no right or wrong here this is my curent daily driver even do its not fancy it do the job in term of washing and rinsing even if its a top load its 100%

  View Full Size

Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy