Thread Number: 91664
/ Tag: Vintage Automatic Washers
1950s Westinghouse Laundromat front load washer boot seal remake project |
[Down to Last] |
|
Post# 1162039 , Reply# 1   10/19/2022 at 22:15 (554 days old) by dnastrau (Lords Valley, PA)   |   | |
Checkrate/Likes
 
1    
Another part grouping that would likely be of interest regarding reproduction would be the door gaskets for the Maytag Halo of Heat dryers. Andrew S. |
Post# 1162040 , Reply# 2   10/19/2022 at 22:54 (554 days old) by Adam-aussie-vac (Canberra ACT)   |   | |
Checkrate/Likes
 
     
Do you know if anybody can re-manufacture of the dry gaskets for Westinghouse dryers? We as well as re-manufacturing the Toploader boot seal for a Thor automagic |
Post# 1162065 , Reply# 3   10/20/2022 at 07:38 (554 days old) by keymatic (London / UK)   |   | |
Checkrate/Likes
 
     
Hi Adam,
I saw your comment about the Thor Automagic boot, I will have a look at who I used in the UK, I approached a company many years ago who manufactured rubber bellows for the automotive industry and they made one for me, I sent them the split one as a guide. I thought i would never be able to get my very first Automagic from 1996 into operation but it was saved and still runs perfect to this day. The repro was thinner than the original but had a good amount of stretch to it to allow for unbalanced loads. Regards Keith
View Full Size
|
Post# 1162067 , Reply# 4   10/20/2022 at 07:43 (554 days old) by Adam-aussie-vac (Canberra ACT)   |   | |
Checkrate/Likes
 
     
Are they still around? |
Post# 1162075 , Reply# 5   10/20/2022 at 09:24 (554 days old) by qsd-dan (West)   |   | |
Checkrate/Likes
 
1    
|
Post# 1162112 , Reply# 6   10/20/2022 at 17:25 (553 days old) by Chestermikeuk (Rainhill *Home of the RailwayTrials* Merseyside,UK)   |   | |
Checkrate/Likes
 
     
|
Post# 1162116 , Reply# 7   10/20/2022 at 17:50 (553 days old) by Adam-aussie-vac (Canberra ACT)   |   | |
Checkrate/Likes
 
     
Let me know if you come across a dishwasher attachment, I need to find one for mine as well |
Post# 1170458 , Reply# 8   1/26/2023 at 21:25 (455 days old) by Marks (Tucker, GA)   |   | |
Checkrate/Likes
 
     
I would also be VERY interested in a reproduction of a westinghouse door boot. I have an old broken one that might make a good template. Shoot me a message if you think that it could work.
Also, the drain pump pulley tire is another failure point of these machines and there’s nothing left out there that can replace it. I also have a broken one of these too, if it helps to make a new one. -Mark |
Post# 1170502 , Reply# 9   1/27/2023 at 13:08 (454 days old) by KENMORE58 (Rhode Island)   |   | |
Checkrate/Likes
 
     
|