Thread Number: 92106
/ Tag: Modern Automatic Washers
Looking for dual action agitator |
[Down to Last] |
Post# 1166627   12/15/2022 at 12:40 (498 days old) by ryner1988 (Indianapolis)   |   | |
Checkrate/Likes
 
     
Good afternoon,
Where can I find a dual action auger agitator for my WP DD washer? It is one of the more entry level models so it has the two-piece surgilator, straight-vein agitators in it. It does however have a 3.2 cu. ft. tub so I know a DAA would fit and I like the wash action of the DAA better over all. However, I can't tell which agitators are the DAA's just by searching online. So a point in the right direction would be great. Thanks, Ryne |
|
Post# 1166631 , Reply# 1   12/15/2022 at 13:31 (498 days old) by coldspot66 (Plymouth, Mass)   |   | |
Checkrate/Likes
 
1    
Several part #'s....3951744 is the Whirlpool version. Better still is the Kenmore version....auger corkscrew section is angled/pitched lower for more rollover. I do have a used Whirlpool version. kenmore part # is 285727. |
Post# 1166644 , Reply# 2   12/15/2022 at 15:58 (498 days old) by ryner1988 (Indianapolis)   |   | |
Checkrate/Likes
 
     
|
Post# 1166652 , Reply# 3   12/15/2022 at 17:23 (498 days old) by coldspot66 (Plymouth, Mass)   |   | |
Checkrate/Likes
 
1    
The bolt should be the same. |
Post# 1166785 , Reply# 4   12/16/2022 at 17:38 (497 days old) by ryner1988 (Indianapolis)   |   | |
Checkrate/Likes
 
1    
Says it should be here Tuesday. I also ordered a new bolt because I figured the other one was probably rusty since I think the agitator in the machine is original. Figured it wouldn't hurt to just replace the whole thing.
My brother-in-law is going to help me fix the neutral drain on the washer as well so also bought a refurbed transmission as well as new commercial-grade clutch and coupler. There's nothing wrong with the coupler as far as I know but I'm not sure how old it is so thought we'd just replace it while the machine is apart. Family will be in town over Christmas so I think repairs should take place around that time. Merry Christmas to me? I guess? LOL |
Post# 1167886 , Reply# 5   12/30/2022 at 18:13 (483 days old) by maytaga806 (Howell, Michigan)   |   | |
Checkrate/Likes
 
     
I’m confused by when you said it’s a two piece agitator with straight vanes? If it’s a Whirlpool model with an original Whirlpool agitator then the Kenmore auger won’t fit on the lower piece post because the Kenmore agitators had a longer post for the auger to sit on, VS the Whirlpool model agitators like mine in the photo. If it has a shorter post like mine does it will require a Whirlpool model auger with the thin or thicker fins around it.
View Full Size
|